Instead of using spi_xfer for SPI_XFER_BEGIN and SPI_XFER_END separatley use common read call spi_flash_read_common() which does the same.
Signed-off-by: Jagannadha Sutradharudu Teki <[email protected]> --- Changes for v2: - none drivers/mtd/spi/spi_flash.c | 17 +++++------------ 1 file changed, 5 insertions(+), 12 deletions(-) diff --git a/drivers/mtd/spi/spi_flash.c b/drivers/mtd/spi/spi_flash.c index 821aa2e..765d4bc 100644 --- a/drivers/mtd/spi/spi_flash.c +++ b/drivers/mtd/spi/spi_flash.c @@ -193,32 +193,25 @@ int spi_flash_cmd_read_fast(struct spi_flash *flash, u32 offset, int spi_flash_cmd_poll_bit(struct spi_flash *flash, unsigned long timeout, u8 cmd, u8 poll_bit) { - struct spi_slave *spi = flash->spi; unsigned long timebase; int ret; u8 status; - ret = spi_xfer(spi, 8, &cmd, NULL, SPI_XFER_BEGIN); - if (ret) { - debug("SF: Failed to send command %02x: %d\n", cmd, ret); - return ret; - } - timebase = get_timer(0); do { WATCHDOG_RESET(); - ret = spi_xfer(spi, 8, NULL, &status, 0); - if (ret) - return -1; + ret = spi_flash_read_common(flash, &cmd, 1, &status, 1); + if (ret < 0) { + debug("SF: fail to read read status register\n"); + return ret; + } if ((status & poll_bit) == 0) break; } while (get_timer(timebase) < timeout); - spi_xfer(spi, 0, NULL, NULL, SPI_XFER_END); - if ((status & poll_bit) == 0) return 0; -- 1.8.3 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
