Dear Alim Akhtar, On 25/03/13 13:38, Akshay Saraswat wrote: > From: Alim Akhtar <[email protected]> > > When no device is conneted on the i2c channel then i2c_probe command
conneted -> connected > was taking too much of time (around 3 mins) to come out from the loop. > Now reduced the delay loop to milisec value. > This is tested on smdk5250 only. As i dont have s3c24x0 boards, so i cannt > test on these baord. dont -> don't, cannt -> can't?, baord -> board And these two line(This is tested... board) should move under "---" line. I think it is not a commit msg. > > Signed-off-by: Alim Akhtar <[email protected]> > Signed-off-by: Doug Anderson <[email protected]> > Signed-off-by: Akshay Saraswat <[email protected]> > --- > drivers/i2c/s3c24x0_i2c.c | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > Patch looks good. Please fix typo. Thanks, Minkyu Kang. _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
