On 05/06/2013 03:05, Fabio Estevam wrote: > From: Fabio Estevam <fabio.este...@freescale.com> > > When running the "save" command several times on a mx6qsabresd we see: > > U-Boot > save > Saving Environment to MMC... > Writing to MMC(1)... done > U-Boot > save > Saving Environment to MMC... > MMC partition switch failed > U-Boot > save > Saving Environment to MMC... > Writing to MMC(1)... done > U-Boot > save > Saving Environment to MMC... > MMC partition switch failed > U-Boot > save > Saving Environment to MMC... > Writing to MMC(1)... done > U-Boot > save > Saving Environment to MMC... > MMC partition switch failed > > This issue is caused by the incorrect usage of CONFIG_SYS_MMC_ENV_PART. > > CONFIG_SYS_MMC_ENV_PART should be used to specify the mmc partition that > stores > the environment variables. > > On some imx boards it is been incorrectly used to pass the partition of kernel > and dtb files for the 'mmcpart' script variable. > > Remove the CONFIG_SYS_MMC_ENV_PART usage and configure the 'mmcpart' variable > directly. > > Reported-by: Jason Liu <r64...@freescale.com> > Signed-off-by: Fabio Estevam <fabio.este...@freescale.com> > ---
Applied to u-boot-imx, thanks. Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
