On 06/12/2013 02:00 AM, Scott Wood wrote:
On 06/09/2013 05:24:05 AM, Chunhe Lan wrote:
+ /* W**G* - Flash, localbus */
+ /* This will be changed to *I*G* after relocation to RAM. */
+ SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_W|MAS2_G,
+ 0, 2, BOOKE_PAGESZ_256M, 1),
Do not set MAS3_SX on I/O regions.
Here is need to use MAS3_SX, or u-boot does NOT work.
+/*
+ * Memory map
+ *
+ * 0x0000_0000 0x1fff_ffff DDR 500M Cacheable
500M? Are you sure?
Yes, system has the 500MB size of ddr.
Thanks,
-Chunhe
+#if defined(CONFIG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb
serial port */
+#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
+#endif
Get rid of this.
+#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */
The out-of-the-box environment is not going to work unmodified (I
don't even see a CONFIG_BOOTCOMMAND), so let's just default this to -1
now that it no longer has the affect of disabling the code at
compile-time.
-Scott
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot