The following changes since commit 7315cfd9e1922ee1c3c5f016e5a3b16199122172:
NET: Fix system hanging if NET device is not installed (2013-06-19 08:32:44 -0400) are available in the git repository at: git://www.denx.de/git/u-boot-mpc85xx.git master for you to fetch changes up to 5707233880090f785c33df32c04549ea1aeef61e: powerpc/85xx: Add P1023RDB board support (2013-06-20 17:08:53 -0500) ---------------------------------------------------------------- Andy Fleming (2): 85xx: Change clock-frequency compatible to 2.0 85xx: Change case of MPC85XX_PORBMSR_ROMLOC_SHIFT Axel Lin (1): powerpc: mpc85xx/mpc86xx: Fix off-by-one boundary checking with ARRAY_SIZE Chris Packham (1): powerpc/CoreNet: Allow pbl images to take u-boot images != 512K Chunhe Lan (1): powerpc/85xx: Add P1023RDB board support Fabio Estevam (1): powerpc: Use lower case for the core names Liu Gang (6): powerpc/doc: Update the README.srio-pcie-boot-corenet powerpc/boot: Change the macro of Boot from SRIO and PCIE master module powerpc/b4860qds: Enable master module for boot from SRIO and PCIE powerpc/b4860qds: Slave module for boot from SRIO and PCIE powerpc/t4qds: Enable master module for Boot from SRIO and PCIE powerpc/t4qds: Slave module for boot from SRIO and PCIE Mingkai Hu (2): powerpc/mpc85xx: explicit cast the SDRAM size to type phys_size_t fsl_ifc: add support for different IFC bank count Prabhakar Kushwaha (9): powerpc/mpc85xx:No NOR boot, do not compile IFC errata A003399 powerpc/mpc85xx: new SPL support for IFC NAND board/p1010rdb:Add NAND boot support using new SPL format board/bsc9131rdb:Add NAND boot support using new SPL format board/bsc9132qds:Add NAND boot support using new SPL format powerpc/mpc85xx:Fix "boot page TLB" entry size for NAND SPL board/b4860qds: Relax NOR flash teadc timing parameter board/p1010rdb: Fix PCIe TLB creation on CONFIG_PCI define powerpc/mpc85xx:Disable Debug TLB entry before init_tlbs Priyanka Jain (3): board/bsc9131rdb: Add targets for Sysclk 100MHz board/bsc9131rdb: Add DSP side tlb and laws board/bsc9131rdb: Update default boot environment settings Scott Wood (1): powerpc/mpc85xx: work around erratum A-006593 Ying Zhang (4): powerpc/mpc85xx: support application without resetvec segment in the linker script powerpc/mpc85xx: modify the functionality clear_bss and aligning the end address of the BSS common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT for environment in SPL Makefile: move the common makefile line to public area York Sun (2): powerpc/BSC9132: Add IFC bank count powerpc/pixis: Fix pixis help message README | 27 ++ arch/powerpc/cpu/mpc85xx/Makefile | 1 + arch/powerpc/cpu/mpc85xx/cmd_errata.c | 3 + arch/powerpc/cpu/mpc85xx/cpu.c | 10 +- arch/powerpc/cpu/mpc85xx/cpu_init.c | 5 +- arch/powerpc/cpu/mpc85xx/cpu_init_early.c | 10 +- arch/powerpc/cpu/mpc85xx/fdt.c | 2 +- arch/powerpc/cpu/mpc85xx/mpc8536_serdes.c | 4 +- arch/powerpc/cpu/mpc85xx/mpc8544_serdes.c | 4 +- arch/powerpc/cpu/mpc85xx/mpc8548_serdes.c | 2 +- arch/powerpc/cpu/mpc85xx/mpc8568_serdes.c | 2 +- arch/powerpc/cpu/mpc85xx/mpc8569_serdes.c | 2 +- arch/powerpc/cpu/mpc85xx/mpc8572_serdes.c | 2 +- arch/powerpc/cpu/mpc85xx/p1010_serdes.c | 4 +- arch/powerpc/cpu/mpc85xx/p1021_serdes.c | 2 +- arch/powerpc/cpu/mpc85xx/p1022_serdes.c | 4 +- arch/powerpc/cpu/mpc85xx/p1023_serdes.c | 2 +- arch/powerpc/cpu/mpc85xx/p2020_serdes.c | 2 +- arch/powerpc/cpu/mpc85xx/p2041_serdes.c | 2 +- arch/powerpc/cpu/mpc85xx/p3041_serdes.c | 2 +- arch/powerpc/cpu/mpc85xx/p4080_serdes.c | 2 +- arch/powerpc/cpu/mpc85xx/p5020_serdes.c | 2 +- arch/powerpc/cpu/mpc85xx/p5040_serdes.c | 2 +- arch/powerpc/cpu/mpc85xx/start.S | 2 +- arch/powerpc/cpu/mpc85xx/t1040_serdes.c | 2 +- arch/powerpc/cpu/mpc85xx/u-boot-spl.lds | 18 +- arch/powerpc/cpu/mpc85xx/u-boot.lds | 8 + arch/powerpc/cpu/mpc86xx/cpu.c | 2 +- arch/powerpc/cpu/mpc86xx/mpc8610_serdes.c | 4 +- arch/powerpc/cpu/mpc86xx/mpc8641_serdes.c | 4 +- arch/powerpc/cpu/mpc8xxx/fsl_ifc.c | 60 ++- arch/powerpc/cpu/mpc8xxx/srio.c | 4 +- arch/powerpc/include/asm/config_mpc85xx.h | 13 +- arch/powerpc/include/asm/fsl_ifc.h | 95 +++-- arch/powerpc/include/asm/fsl_law.h | 5 + arch/powerpc/include/asm/immap_85xx.h | 4 +- board/freescale/b4860qds/tlb.c | 19 + board/freescale/bsc9131rdb/Makefile | 16 + board/freescale/bsc9131rdb/README | 18 +- board/freescale/bsc9131rdb/law.c | 4 + board/freescale/bsc9131rdb/spl_minimal.c | 118 ++++++ board/freescale/bsc9131rdb/tlb.c | 17 +- board/freescale/bsc9132qds/Makefile | 17 + board/freescale/bsc9132qds/bsc9132qds.c | 4 +- board/freescale/bsc9132qds/law.c | 6 +- board/freescale/bsc9132qds/spl_minimal.c | 130 +++++++ board/freescale/bsc9132qds/tlb.c | 27 +- board/freescale/common/Makefile | 10 + board/freescale/common/pixis.c | 2 + board/freescale/p1010rdb/Makefile | 16 + .../freescale/p1010rdb/spl_minimal.c | 20 +- board/freescale/p1010rdb/tlb.c | 13 +- board/freescale/p1023rdb/Makefile | 33 ++ board/freescale/p1023rdb/ddr.c | 105 +++++ board/freescale/p1023rdb/law.c | 34 ++ board/freescale/p1023rdb/p1023rdb.c | 161 ++++++++ board/freescale/p1023rdb/tlb.c | 115 ++++++ board/freescale/t4qds/tlb.c | 19 + boards.cfg | 8 + common/Makefile | 44 ++- doc/README.srio-pcie-boot-corenet | 34 +- drivers/mtd/nand/Makefile | 1 + .../mtd/nand/fsl_ifc_spl.c | 37 +- drivers/pci/fsl_pci_init.c | 6 +- include/configs/B4860QDS.h | 35 +- include/configs/BSC9131RDB.h | 62 ++- include/configs/BSC9132QDS.h | 63 ++- include/configs/P1010RDB.h | 77 ++-- include/configs/P1023RDB.h | 401 ++++++++++++++++++++ include/configs/P2041RDB.h | 1 + include/configs/P3041DS.h | 2 +- include/configs/P4080DS.h | 2 +- include/configs/P5020DS.h | 2 +- include/configs/a3m071.h | 1 + include/configs/am335x_evm.h | 1 + include/configs/pcm051.h | 1 + include/configs/t4qds.h | 35 +- lib/Makefile | 14 +- nand_spl/board/freescale/p1010rdb/Makefile | 142 ------- tools/pblimage.c | 32 +- 80 files changed, 1831 insertions(+), 393 deletions(-) create mode 100644 board/freescale/bsc9131rdb/spl_minimal.c create mode 100644 board/freescale/bsc9132qds/spl_minimal.c rename nand_spl/board/freescale/p1010rdb/nand_boot.c => board/freescale/p1010rdb/spl_minimal.c (95%) create mode 100644 board/freescale/p1023rdb/Makefile create mode 100644 board/freescale/p1023rdb/ddr.c create mode 100644 board/freescale/p1023rdb/law.c create mode 100644 board/freescale/p1023rdb/p1023rdb.c create mode 100644 board/freescale/p1023rdb/tlb.c rename nand_spl/nand_boot_fsl_ifc.c => drivers/mtd/nand/fsl_ifc_spl.c (88%) create mode 100644 include/configs/P1023RDB.h delete mode 100644 nand_spl/board/freescale/p1010rdb/Makefile _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot