Update the Makefiles so that all boards can use the same spl generation tool
Signed-off-by: Inderpal Singh <[email protected]> --- This is needed for the Arndale board support patch just sent after sending this one. Makefile | 2 +- include/configs/exynos5250-dt.h | 2 +- tools/Makefile | 4 ++-- 3 files changed, 4 insertions(+), 4 deletions(-) diff --git a/Makefile b/Makefile index af4c3c0..d8c5d3f 100644 --- a/Makefile +++ b/Makefile @@ -821,7 +821,7 @@ clean: $(obj)tools/gdb/{astest,gdbcont,gdbsend} \ $(obj)tools/gen_eth_addr $(obj)tools/img2srec \ $(obj)tools/mk{env,}image $(obj)tools/mpc86x_clk \ - $(obj)tools/mk{smdk5250,}spl \ + $(obj)tools/mk{$(BOARD),}spl \ $(obj)tools/mxsboot \ $(obj)tools/ncb $(obj)tools/ubsha1 \ $(obj)tools/kernel-doc/docproc diff --git a/include/configs/exynos5250-dt.h b/include/configs/exynos5250-dt.h index 1c9eca2..a782880 100644 --- a/include/configs/exynos5250-dt.h +++ b/include/configs/exynos5250-dt.h @@ -29,7 +29,7 @@ #define CONFIG_SAMSUNG /* in a SAMSUNG core */ #define CONFIG_S5P /* S5P Family */ #define CONFIG_EXYNOS5 /* which is in a Exynos5 Family */ -#define CONFIG_SMDK5250 /* which is in a SMDK5250 */ +#define CONFIG_EXYNOS5250 #include <asm/arch/cpu.h> /* get chip and board defs */ diff --git a/tools/Makefile b/tools/Makefile index 4630f03..5eb14c5 100644 --- a/tools/Makefile +++ b/tools/Makefile @@ -68,7 +68,7 @@ BIN_FILES-$(CONFIG_CMD_LOADS) += img2srec$(SFX) BIN_FILES-$(CONFIG_XWAY_SWAP_BYTES) += xway-swap-bytes$(SFX) BIN_FILES-y += mkenvimage$(SFX) BIN_FILES-y += mkimage$(SFX) -BIN_FILES-$(CONFIG_SMDK5250) += mksmdk5250spl$(SFX) +BIN_FILES-$(CONFIG_EXYNOS5250) += mk$(BOARD)spl$(SFX) BIN_FILES-$(CONFIG_MX23) += mxsboot$(SFX) BIN_FILES-$(CONFIG_MX28) += mxsboot$(SFX) BIN_FILES-$(CONFIG_NETCONSOLE) += ncb$(SFX) @@ -100,7 +100,7 @@ NOPED_OBJ_FILES-y += image-host.o NOPED_OBJ_FILES-y += omapimage.o NOPED_OBJ_FILES-y += mkenvimage.o NOPED_OBJ_FILES-y += mkimage.o -OBJ_FILES-$(CONFIG_SMDK5250) += mkexynosspl.o +OBJ_FILES-$(CONFIG_EXYNOS5250) += mkexynosspl.o OBJ_FILES-$(CONFIG_MX23) += mxsboot.o OBJ_FILES-$(CONFIG_MX28) += mxsboot.o OBJ_FILES-$(CONFIG_NETCONSOLE) += ncb.o -- 1.7.9.5 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
