The old value of 0x000e0030 will cause ethernet timeout issues on the sabrelite and possibly other boards using the KSZ9021. I have no explanation as to why.
But this is a correct change, the TRM will be updated to show that 00b is the only valid setting for bits 19-18 of DRAM_RESET. My thanks go to Liu Hui(Jason) for this information. Signed-off-by: Troy Kisky <[email protected]> --- board/boundary/nitrogen6x/ddr-setup.cfg | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/board/boundary/nitrogen6x/ddr-setup.cfg b/board/boundary/nitrogen6x/ddr-setup.cfg index c315812..e5f8add 100644 --- a/board/boundary/nitrogen6x/ddr-setup.cfg +++ b/board/boundary/nitrogen6x/ddr-setup.cfg @@ -74,7 +74,7 @@ DATA 4, MX6_IOM_DRAM_RAS, 0x00020030 DATA 4, MX6_IOM_DRAM_SDCLK_0, 0x00020030 DATA 4, MX6_IOM_DRAM_SDCLK_1, 0x00020030 -DATA 4, MX6_IOM_DRAM_RESET, 0x000e0030 +DATA 4, MX6_IOM_DRAM_RESET, 0x00020030 DATA 4, MX6_IOM_DRAM_SDCKE0, 0x00003000 DATA 4, MX6_IOM_DRAM_SDCKE1, 0x00003000 -- 1.8.1.2 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
