On Thu, Jul 25, 2013 at 6:13 PM, <dgilm...@fedoraproject.org> wrote: > From: Dennis Gilmore <den...@ausil.us>
highbank? what does this means? > Signed-off-by: Dennis Gilmore <den...@ausil.us> > --- > include/configs/wandboard.h | 42 +++++++++++++++++++++++++++++++++++++++--- > 1 file changed, 39 insertions(+), 3 deletions(-) > > diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h > index ee6bf21..a5052c5 100644 > --- a/include/configs/wandboard.h > +++ b/include/configs/wandboard.h > @@ -58,6 +58,8 @@ > #define CONFIG_LOADADDR 0x12000000 > #define CONFIG_SYS_TEXT_BASE 0x17800000 > > +#define CONFIG_SUPPORT_RAW_INITRD > + > /* MMC Configuration */ > #define CONFIG_FSL_ESDHC > #define CONFIG_FSL_USDHC > @@ -72,6 +74,14 @@ > #define CONFIG_CMD_FAT > #define CONFIG_DOS_PARTITION > > +/* PXE support */ > +#define CONFIG_BOOTP_PXE > +#define CONFIG_BOOTP_PXE_CLIENTARCH 0x100 > +#define CONFIG_BOOTP_VCI_STRING "U-boot.armv7.wandboard" > +#define CONFIG_CMD_PXE > +#define CONFIG_MENU > + > + Please use a single empty line. > /* Ethernet Configuration */ > #define CONFIG_CMD_PING > #define CONFIG_CMD_DHCP > @@ -117,7 +127,32 @@ > "initrd_high=0xffffffff\0" \ > "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \ > "fdt_addr=0x11000000\0" \ > + "pxefile_addr_r=0x12000000\0" \ > + "kernel_addr_r=0x13000000\0" \ > + "ramdisk_addr_r=0x32000000\0" \ > + "fdt_addr_r=0x11000000\0" \ Seems some vars are duplicated. > "boot_fdt=try\0" \ > + "bootcmd_setup=mmc rescan\0" \ > + "bootcmd_pxe=setenv bootfile \"\" ;dhcp; pxe get; pxe boot\0" \ > + "bootcmd_disk_scr=ext2load ${boot_ifc} ${bootdevice} ${scr_addr_r} > boot.scr && source ${scr_addr_r}\0" \ > + "bootcmd_disk_sysboot1=setenv bootfile /boot/extlinux/extlinux.conf; > sysboot ${boot_ifc} ${bootdevice} ext2\0" \ > + "bootcmd_disk_sysboot2=setenv bootfile /extlinux/extlinux.conf; > sysboot ${boot_ifc} ${bootdevice} ext2\0" \ > + "bootcmd_disk_uenv=ext2load ${boot_ifc} ${bootdevice} ${uenv_addr_r} > uEnv.txt; env import -t ${uenv_addr_r} ${filesize}; run bootcmd_uenv\0" \ > + "bootcmd_disk_kernel=ext2load ${boot_ifc} ${bootdevice} > ${kernel_addr_r} vmlinuz && ext2load ${boot_ifc} ${bootdevice} > ${ramdisk_addr_r} initrd.img && bootz ${kernel_addr_r} > ${ramdisk_addr_r}:${filesize} ${fdt_addr}\0" \ > + "bootcmd_disk=run bootcmd_disk_sysboot1; run bootcmd_disk_sysboot2; > run bootcmd_disk_uenv; run bootcmd_disk_scr; run bootcmd_disk_kernel\0" \ > + "bootcmd_sata=setenv boot_ifc scsi; scsi scan && run bootcmd_disk\0" \ > + "bootcmd_mmc=setenv boot_ifc mmc; mmc rescan && run bootcmd_disk\0" \ > + "bootcmd_default=run bootcmd_mmc; run bootcmd_sata; run > bootcmd_pxe\0" \ > + "bootcmd0=run bootcmd_setup; run bootcmd_default\0" \ > + "bootcmd1=run bootcmd_setup; run bootcmd_pxe; run bootcmd_default\0" \ > + "bootcmd2=run bootcmd_setup; run bootcmd_sata; run bootcmd_default\0" > \ > + "bootcmd15=run bootcmd_setup; run bootcmd_mmc; run bootcmd_default\0" > \ This all is need? We could have a way to make this extendable and don't have it all duplicated. > + "localcmd=run bootcmd_sata\0" \ > + "bootdevice=0\0" \ > + "bootargs=console=ttymxc0 root=LABEL=rootfs\0" \ > + "bootdelay=2\0" \ > + "bootretry=90\0" \ > + "netretry=once\0" \ > "ip_dyn=yes\0" \ > "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ > "mmcpart=1\0" \ > @@ -139,11 +174,11 @@ > "mmcargs=setenv bootargs console=${console},${baudrate} " \ > "root=${mmcroot}\0" \ > "loadbootscript=" \ > - "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ > + "load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ > "bootscript=echo Running bootscript from mmc ...; " \ > "source\0" \ > - "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" > \ > - "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ > + "loaduimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \ > + "loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ > "mmcboot=echo Booting from mmc ...; " \ > "run mmcargs; " \ > "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ > @@ -186,6 +221,7 @@ > > #define CONFIG_BOOTCOMMAND \ > "mmc dev ${mmcdev}; if mmc rescan; then " \ > + "run bootcmd_default; " \ > "if run loadbootscript; then " \ > "run bootscript; " \ > "else " \ > -- > 1.8.3.1 > > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > http://lists.denx.de/mailman/listinfo/u-boot -- Otavio Salvador O.S. Systems http://www.ossystems.com.br http://projetos.ossystems.com.br Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot