Acked-by: Rajeshwari Shinde <rajeshwar...@samsung.com>
Tested-by: Rajeshwari Shinde <rajeshwar...@samsung.com>

On Sun, Aug 4, 2013 at 12:14 PM, Dani Krishna Mohan
<krishna...@samsung.com> wrote:
> This patch set replaces I2S1 channel with I2S0 channel.
> Corresponding changes have been done in audio codec to
>  support I2S0 channel.
>
> Changes in V2:
>         - Added cover letter.
>         - Configured GPIO chipselect to enable MAX98095 codec.
>
> Dani Krishna Mohan (6):
>   Sound: WM8994: Support I2S0 channel
>   DTS: Addition of I2S0 channel and replacing I2S1
>   ARM: Change from I2S1 to I2S0 for audio on SMDK5250
>   Sound: I2S: Replacing I2S1 with I2S0 channel.
>   DTS: Addition of GPIO chipselect for MAX98095
>   Sound: MAX98095: Support I2S0 channel
>
>  arch/arm/cpu/armv7/exynos/clock.c           |   13 ++--
>  arch/arm/cpu/armv7/exynos/pinmux.c          |   15 ++++-
>  arch/arm/dts/exynos5250.dtsi                |   10 ++-
>  arch/arm/include/asm/arch-exynos/clock.h    |    8 ++-
>  arch/arm/include/asm/arch-exynos/cpu.h      |    2 +
>  arch/arm/include/asm/arch-exynos/i2s-regs.h |    6 ++
>  arch/arm/include/asm/arch-exynos/periph.h   |    1 +
>  board/samsung/dts/exynos5250-smdk5250.dts   |    8 +--
>  board/samsung/dts/exynos5250-snow.dts       |    9 +--
>  drivers/sound/max98095.c                    |   29 ++++----
>  drivers/sound/samsung-i2s.c                 |   16 +++--
>  drivers/sound/sound.c                       |    2 +-
>  drivers/sound/wm8994.c                      |   95 
> +++++++++++----------------
>  drivers/sound/wm8994_registers.h            |   77 ++++++++++++----------
>  14 files changed, 149 insertions(+), 142 deletions(-)
>
> --
> 1.7.9.5
>
> _______________________________________________
> U-Boot mailing list
> U-Boot@lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot



-- 
Regards,
Rajeshwari Shinde
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to