SGMII5/6 and SGMII7/8 are not on the same slot on P5040
according to the serdes protocol.
So it is not proper to organize SGMII5/6 and SGMII7/8
on one bus and SGMII5/6 can't work.
So a new bus SUPER_HYDRA_FM3_SGMII_MDIO is added for
SGMII5/6
Signed-off-by: Zhao Qiang <b45...@freescale.com>
---
board/freescale/corenet_ds/eth_superhydra.c | 22 ++++++++++++++++++----
1 file changed, 18 insertions(+), 4 deletions(-)
diff --git a/board/freescale/corenet_ds/eth_superhydra.c
b/board/freescale/corenet_ds/eth_superhydra.c
index ae07073..00925a6 100644
--- a/board/freescale/corenet_ds/eth_superhydra.c
+++ b/board/freescale/corenet_ds/eth_superhydra.c
@@ -465,6 +465,8 @@ int board_eth_init(bd_t *bis)
"SUPER_HYDRA_FM1_SGMII_MDIO");
super_hydra_mdio_init(DEFAULT_FM_MDIO_NAME,
"SUPER_HYDRA_FM2_SGMII_MDIO");
+ super_hydra_mdio_init(DEFAULT_FM_MDIO_NAME,
+ "SUPER_HYDRA_FM3_SGMII_MDIO");
super_hydra_mdio_init(DEFAULT_FM_TGEC_MDIO_NAME,
"SUPER_HYDRA_FM1_TGEC_MDIO");
super_hydra_mdio_init(DEFAULT_FM_TGEC_MDIO_NAME,
@@ -654,10 +656,22 @@ int board_eth_init(bd_t *bis)
break;
};
- super_hydra_mdio_set_mux("SUPER_HYDRA_FM2_SGMII_MDIO",
- mdio_mux[i].mask, mdio_mux[i].val);
- fm_info_set_mdio(i,
- miiphy_get_dev_by_name("SUPER_HYDRA_FM2_SGMII_MDIO"));
+ if (i == FM2_DTSEC1 || i == FM2_DTSEC2) {
+ super_hydra_mdio_set_mux(
+ "SUPER_HYDRA_FM3_SGMII_MDIO",
+ mdio_mux[i].mask,
+ mdio_mux[i].val);
+ fm_info_set_mdio(i, miiphy_get_dev_by_name(
+ "SUPER_HYDRA_FM3_SGMII_MDIO"));
+ } else {
+ super_hydra_mdio_set_mux(
+ "SUPER_HYDRA_FM2_SGMII_MDIO",
+ mdio_mux[i].mask,
+ mdio_mux[i].val);
+ fm_info_set_mdio(i, miiphy_get_dev_by_name(
+ "SUPER_HYDRA_FM2_SGMII_MDIO"));
+ }
+
break;
case PHY_INTERFACE_MODE_RGMII:
/*
--
1.8.0
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
