On Wednesday 04 September 2013 02:18 PM, Michael Trimarchi wrote: > Hi > > On Wed, Sep 4, 2013 at 10:44 AM, Sricharan R <r.sricha...@ti.com> wrote: >> On Wednesday 04 September 2013 01:01 PM, bin4ry wrote: >>> Hi everybody, >>> >>> I need to add functionality to the SPL code. I tried to implement in a >>> memory-saving way, however, the SPL is about 45 kB after compilation. To >>> get compilation working, I had to set CONFIG_SPL_MAX_SIZE to (45 * >>> 1024). Now, the SPL as well as u-boot won't boot. After the device' >>> (PandaBoard ES - OMAP4460) reset, nothing happens regarding it's output >>> on terminal. >>> >>> My question: is it theoretically possible to to establish a successfully >>> booting SPL with ~45 kB in size for this device? The device' >>> on-chip-memory is 56kB so it could fit in there. If so, what needs to be >>> configured / tuned to get it working? Are there any other features I >>> could omit from the binary to make it smaller? >>> >>> Thanks a lot, >>> -b >>> _______________________________________________ >>> U-Boot mailing list >>> U-Boot@lists.denx.de >>> http://lists.denx.de/mailman/listinfo/u-boot >>> >> Do you have a Secure device or GP ? >> > if it is Pandaboard? No he has not. I have increased up to 40Kb and it > works with serial boot and > sdcard/emmc boot. Sorry i missed to read PANDA. So it is anyways GP. and you changed the CONFIG_SPL_TEXT_BASE as well right ?
Regards, Sricharan _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot