On 08/28/2013 07:04 AM, Valentin Longchamp wrote: > This patch introduces the support for Keymile's kmp204x reference > design. This design is based on Freescale's P2040/P2041 SoC. > > The peripherals used by this design are: > - DDR3 RAM with SPD support > - SPI NOR Flash as boot medium > - NAND Flash > - 2 PCIe busses (hosts 1 and 3) > - 3 FMAN Ethernet devices (FMAN1 DTSEC1/2/5) > - 3 Local Bus windows, with one dedicated to the QRIO reset/power mgmt > FPGA > - 2 HW I2C busses > - last but not least, the mandatory serial port > > The board/keymile/kmp204x code is mostly based on Freescale's P2041rdb > support and was changed according to our design (that means essentially > removing what is not present on the designs and a few adaptations). > > There is currently only one prototype board that is based on this design > and this patch also introduces it. The board is called kmlion1. > > Signed-off-by: Stefan Bigler <[email protected]> > Signed-off-by: Valentin Longchamp <[email protected]> > --- > Changes in v2: > - Remove patch "5/8 fsl: do not define FSL_SRIO_PCIE_BOOT_MASTER for all > P2041 systems" from the series as it is not needed with current u-boot. > - fix the defines used in kmp204x/law.c for the lbus local address > windows. > - fix the header files to include Freescale's copyrights > - integrate Scott's feedback > > Please use the new license header string.
York _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
