Hello York,
Am 10.09.2013 23:14, schrieb York Sun:
On 09/10/2013 02:13 PM, Chris Packham wrote:
Hi Xie,
On Tue, Sep 10, 2013 at 8:15 PM, Shaohui Xie<[email protected]> wrote:
Without this patch, SPD access will fail which leads to DDR init fail.
Signed-off-by: Shaohui Xie<[email protected]>
---
include/configs/P2041RDB.h | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
Thanks for this fix!
diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h
index 905bacf..862614b 100644
--- a/include/configs/P2041RDB.h
+++ b/include/configs/P2041RDB.h
@@ -354,10 +354,10 @@ unsigned long get_board_sys_clk(unsigned long dummy);
#define CONFIG_SYS_I2C_FSL
#define CONFIG_SYS_FSL_I2C_SPEED 400000
#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F
-#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000
+#define CONFIG_SYS_FSL_I2C_OFFSET 0x118000
#define CONFIG_SYS_FSL_I2C2_SPEED 400000
#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F
-#define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100
+#define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100
/*
* RapidIO
--
1.7.0.4
Yes that appears to fix the problem. Thanks for the quick turn around.
Tested-by: Chris Packham<[email protected]>
Thanks for testing.
Thanks for the feedback. I will take it in u-boot-mpc85xx.
Ah, Ok, I am fine with this, so:
Acked-by: Heiko Schocher <[email protected]>
bye,
Heiko
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot
