Hi Ajay, On Sep 24, 2013, at 11:02 AM, Ajay Bhargav wrote:
> This patch add SD/MMC interface register difinitions for Armada100 > series. > > Signed-off-by: Ajay Bhargav <ajay.bhar...@einfochips.com> > --- > arch/arm/include/asm/arch-armada100/armada100.h | 10 ++++++++++ > 1 file changed, 10 insertions(+) > > diff --git a/arch/arm/include/asm/arch-armada100/armada100.h > b/arch/arm/include/asm/arch-armada100/armada100.h > index d9feb16..81e4b8a 100644 > --- a/arch/arm/include/asm/arch-armada100/armada100.h > +++ b/arch/arm/include/asm/arch-armada100/armada100.h > @@ -27,6 +27,14 @@ > #define SSP2_APBCLK 0x01 > #define SSP2_FNCLK 0x02 > > +/* SD Clock/Reset Control Register Bit definition */ > +#define SD1_SD2_AXI_RESET 0x01 > +#define SD1_RESET 0x02 > +#define SD1_SD2_AXICLK_EN 0x08 > +#define SD1_CLK_EN 0x10 > +#define SD2_RESET 0x02 > +#define SD2_CLK_EN 0x10 > + > /* USB Clock/reset control bits */ > #define USB_SPH_AXICLK_EN 0x10 > #define USB_SPH_AXI_RST 0x02 > @@ -53,6 +61,8 @@ > #define ARMD1_UART3_BASE 0xD4026000 > #define ARMD1_MPMU_BASE 0xD4050000 > #define ARMD1_USB_HOST_BASE 0xD4209000 > +#define ARMD1_SD1_BASE 0xD4280000 > +#define ARMD1_SD2_BASE 0xD4281000 > #define ARMD1_APMU_BASE 0xD4282800 > #define ARMD1_CPU_BASE 0xD4282C00 > > -- > 1.8.3.rc3 > Looks fine. Acked-by: Pantelis Antoniou <pa...@antoniou-consulting.com> > ************************************************************************************************************************************************************* > eInfochips Business Disclaimer : This e-mail message and all attachments > transmitted with it are intended solely for the use of the addressee and may > contain legally privileged and confidential information. If the reader of > this message is not the intended recipient, or an employee or agent > responsible for delivering this message to the intended recipient, you are > hereby notified that any dissemination, distribution, copying, or other use > of this message or its attachments is strictly prohibited. If you have > received this message in error, please notify the sender immediately by > replying to this message and please delete it from your computer. Any views > expressed in this message are those of the individual sender unless otherwise > stated. Company has taken enough precautions to prevent the spread of > viruses. However the company accepts no liability for any damage caused by > any virus transmitted by this email. > ************************************************************************************************************************************************************* > > > --------------------------------------------------------------------------------------------- > Notice: > This message has been scanned by Trend Micro Mail Security scanner and is > believed to be clean > --------------------------------------------------------------------------------------------- _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
