Michael, Again, sorry. I will continue to work on improving my style for commit messages in the future.
Michael Burr // Software Engineer II Logic PD T // 612.436.7273 NOTICE: Important disclaimers and limitations apply to this email. Please see this web page for our disclaimers and limitations: http://logicpd.com/email-disclaimer/ -----Original Message----- From: Michal Simek [mailto:[email protected]] Sent: Wednesday, September 25, 2013 1:10 AM To: Michael Burr Cc: [email protected]; Heiko Schocher Subject: Re: [PATCH] I2C: Zynq: Support for 0-length register address On 09/24/2013 06:32 PM, Michael Burr wrote: >> Fixed bug with alen == 0 in 'i2c_write', 'i2c_read' > Further minor corrections: >> Write 'address' register before 'data' register. >> Write 'transfer_size' register before 'address' register. This is still not acceptable format (I mean reply in commit message). >From minor correction create separate small patches. It can be just one line patch but it worth to have it in connection to bisecting. > > Tested: > Xilinx ZC702 eval board. > Write and read registers with addresses of length 0 and 1. This could go below "---" Thanks, Michal -- Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91 w: www.monstr.eu p: +42-0-721842854 Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/ Maintainer of Linux kernel - Xilinx Zynq ARM architecture Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
