On Thu, 2013-09-26 at 13:14 +0000, Gupta, Pekon wrote: > > > From: Gupta, Pekon <pe...@ti.com> > > > > > > NAND driver needs to know bus-width of the connected NAND device, in > > order to perform proper I/O and initialize itself. Currently there is no > > CONFIG > > option to provide this information to NAND driver. > > > - SPL NAND driver does not have framework to parse ONFI parameter > > page. > > > > Is this about SPL? It looks like a more general change. > > > Yes, actually I would have loved to see a generic SPL driver for all > platforms,
How could that possibly work? > because SPL is mostly statically configured, and it just does plain NAND read > (it doesn’t even support NAND write, etc). > But I do not know the hardware configurations tweaks of other SoC, > So at-least have common CONFIG_SYS_NAND_xx which all SPL drivers can use. Again, are you introducing this symbol for use only in SPL? It looked like you were removing the code that does dynamic detection, which would also affect non-SPL. -Scott _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
