To prevent the confusion, use the get_mmc_clk() instead of mmc_clk(). get_mmc_clk() is more exactly name.
Signed-off-by: Jaehoon Chung <[email protected]> --- drivers/mmc/dw_mmc.c | 6 +++--- drivers/mmc/exynos_dw_mmc.c | 2 +- include/dwmmc.h | 2 +- 3 files changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/mmc/dw_mmc.c b/drivers/mmc/dw_mmc.c index 9a803a0..174e3b5 100644 --- a/drivers/mmc/dw_mmc.c +++ b/drivers/mmc/dw_mmc.c @@ -220,12 +220,12 @@ static int dwmci_setup_bus(struct dwmci_host *host, u32 freq) if ((freq == host->clock) || (freq == 0)) return 0; /* - * If host->mmc_clk didn't define, + * If host->get_mmc_clk didn't define, * then assume that host->bus_hz is source clock value. * host->bus_hz should be set from user. */ - if (host->mmc_clk) - sclk = host->mmc_clk(host->dev_index); + if (host->get_mmc_clk) + sclk = host->get_mmc_clk(host->dev_index); else if (host->bus_hz) sclk = host->bus_hz; else { diff --git a/drivers/mmc/exynos_dw_mmc.c b/drivers/mmc/exynos_dw_mmc.c index 4ef9fec..1f2c53f 100644 --- a/drivers/mmc/exynos_dw_mmc.c +++ b/drivers/mmc/exynos_dw_mmc.c @@ -74,7 +74,7 @@ int exynos_dwmci_add_port(int index, u32 regbase, int bus_width, u32 clksel) host->clksel = exynos_dwmci_clksel; host->dev_index = index; - host->mmc_clk = exynos_dwmci_get_clk; + host->get_mmc_clk = exynos_dwmci_get_clk; /* Add the mmc channel to be registered with mmc core */ if (add_dwmci(host, DWMMC_MAX_FREQ, DWMMC_MIN_FREQ)) { debug("dwmmc%d registration failed\n", index); diff --git a/include/dwmmc.h b/include/dwmmc.h index 08ced0b..ecaa763 100644 --- a/include/dwmmc.h +++ b/include/dwmmc.h @@ -138,7 +138,7 @@ struct dwmci_host { struct mmc *mmc; void (*clksel)(struct dwmci_host *host); - unsigned int (*mmc_clk)(int dev_index); + unsigned int (*get_mmc_clk)(int dev_index); }; struct dwmci_idmac { -- 1.7.9.5 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
