On Apr 9, 2009, at 1:03 PM, Werner Nedel wrote: > > I'm trying to update my u-boot version (1.2) to the last one > (2009.03). My > board is very similar to MPC8548CDS. Everything was working fine > till I > tried to use the reset command. It hangs the processor in > cpu_init_early_f, > when it realocates ccsbar. I'd always used the hard reset in DBCR0 > register > instead HRESET_REQ that ins't wired in my board. > > I saw that the value of MSR register came different before reset > when I > compare with the old u-boot (0x8000 -> 0x29200). There are new > writes in > this register in this new version, could any of them causing my > problem?
It would probably be useful to have any obvious differences in the physical address space from the MPC8548CDS config that exist. - k _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
