On Oct 9, 2013, at 6:39 PM, Marek Vasut <[email protected]> wrote:
> Dear Simon Glass, > >> +Joe (net maintainer) >> +Marek (USB) >> >> Hi Suriyan, >> >> On Mon, Oct 7, 2013 at 9:30 PM, Suriyan Ramasami <[email protected]>wrote: >>> Add LED activity for SMSX95XX USB Ether driver. >>> >>> Signed-off-by: âSuriyan Ramasami" <[email protected]> >>> --- >>> >>> drivers/usb/eth/smsc95xx.c | 14 ++++++++++++++ >>> 1 files changed, 14 insertions(+), 0 deletions(-) >>> >>> diff --git a/drivers/usb/eth/smsc95xx.c b/drivers/usb/eth/smsc95xx.c >>> index 15fd9a9..7bf0a34 100644 >>> --- a/drivers/usb/eth/smsc95xx.c >>> +++ b/drivers/usb/eth/smsc95xx.c >>> @@ -14,6 +14,12 @@ >>> >>> /* SMSC LAN95xx based USB 2.0 Ethernet Devices */ >>> >>> +/* LED defines */ >>> +#define LED_GPIO_CFG (0x24) >>> +#define LED_GPIO_CFG_SPD_LED (0x01000000) >>> +#define LED_GPIO_CFG_LNK_LED (0x00100000) >>> +#define LED_GPIO_CFG_FDX_LED (0x00010000) >>> + >>> >>> /* Tx command words */ >>> #define TX_CMD_A_FIRST_SEG_ 0x00002000 >>> #define TX_CMD_A_LAST_SEG_ 0x00001000 >>> >>> @@ -591,6 +597,14 @@ static int smsc95xx_init(struct eth_device *eth, >>> bd_t *bd) >>> >>> return ret; >>> >>> debug("ID_REV = 0x%08x\n", read_buf); >>> >>> + /* Configure GPIO pins as LED outputs */ >>> + write_buf = LED_GPIO_CFG_SPD_LED | LED_GPIO_CFG_LNK_LED | >>> + LED_GPIO_CFG_FDX_LED; >>> + ret = smsc95xx_write_reg(dev, LED_GPIO_CFG, write_buf); >>> + if (ret < 0) >>> + return ret; >>> + debug("LED_GPIO_CFG set\n"); >>> + >> >> Seems good. >> >> Acked-by: Simon Glass <[email protected]> > > Applied to usb/next > > I kinda wonder if Joe shouldn't pick this one. Is Joe still active ? Sure... When I need to be. > > Best regards, > Marek Vasut _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
