Hi, all

Who can give some comments?


于 2013/10/12 17:50, Haijun Zhang 写道:
> When Auto-CMD12 is used, the corresponding interrupt and error bit
> should be enabled and set to reflect auto cmd 12 error.
> Also add other command error detecting, like command index error,
> CRC error etc. Without this command error bit set system will hang
> due to the while loop.
>
> Signed-off-by: Haijun Zhang <haijun.zh...@freescale.com>
> ---
>  drivers/mmc/fsl_esdhc.c | 10 +++++-----
>  include/fsl_esdhc.h     |  3 ++-
>  2 files changed, 7 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
> index dc1d002..5aa592b 100644
> --- a/drivers/mmc/fsl_esdhc.c
> +++ b/drivers/mmc/fsl_esdhc.c
> @@ -342,13 +342,13 @@ esdhc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, 
> struct mmc_data *data)
>  #endif
>  
>       /* Wait for the command to complete */
> -     while (!(esdhc_read32(&regs->irqstat) & (IRQSTAT_CC | IRQSTAT_CTOE)))
> +     while (!(esdhc_read32(&regs->irqstat) & (IRQSTAT_CC | CMD_ERR)))
>               ;
>  
>       irqstat = esdhc_read32(&regs->irqstat);
>  
>       /* Reset CMD and DATA portions on error */
> -     if (irqstat & (CMD_ERR | IRQSTAT_CTOE)) {
> +     if (irqstat & CMD_ERR) {
>               esdhc_write32(&regs->sysctl, esdhc_read32(&regs->sysctl) |
>                             SYSCTL_RSTC);
>               while (esdhc_read32(&regs->sysctl) & SYSCTL_RSTC)
> @@ -363,12 +363,12 @@ esdhc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, 
> struct mmc_data *data)
>               }
>       }
>  
> -     if (irqstat & CMD_ERR)
> -             return COMM_ERR;
> -
>       if (irqstat & IRQSTAT_CTOE)
>               return TIMEOUT;
>  
> +     if (irqstat & CMD_ERR)
> +             return COMM_ERR;
> +
>       /* Workaround for ESDHC errata ENGcm03648 */
>       if (!data && (cmd->resp_type & MMC_RSP_BUSY)) {
>               int timeout = 2500;
> diff --git a/include/fsl_esdhc.h b/include/fsl_esdhc.h
> index 67d6057..37dbe27 100644
> --- a/include/fsl_esdhc.h
> +++ b/include/fsl_esdhc.h
> @@ -62,7 +62,8 @@
>  #define IRQSTAT_TC           (0x00000002)
>  #define IRQSTAT_CC           (0x00000001)
>  
> -#define CMD_ERR              (IRQSTAT_CIE | IRQSTAT_CEBE | IRQSTAT_CCE)
> +#define CMD_ERR              (IRQSTAT_CIE | IRQSTAT_CEBE | IRQSTAT_CCE | \
> +                             IRQSTAT_CTOE | IRQSTAT_AC12E)
>  #define DATA_ERR     (IRQSTAT_DEBE | IRQSTAT_DCE | IRQSTAT_DTOE | \
>                               IRQSTAT_DMAE)
>  #define DATA_COMPLETE        (IRQSTAT_TC | IRQSTAT_DINT)

-- 
Thanks & Regards
Haijun.


_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to