Hi! Im working on beaglebone variant board - basically the same as beaglebone but with NAND flash on board with am33x processor.
Ubifs works fine when I access it purely from Linux (formatting, making ubifs volume etc.). However, when I try to access it from u-boot, e.g execute ubi part - command, I get tons of ecc error messages. If I reboot board after this, it turns out that this ubifs has been corrupted but that ubi part command. Board is running latest beaglebone linux (3.8.11) with device tree (Angstrom distribution). I have tried both with and without BCH8 HW support enabled in kernel. Both seems to work in the same way as far as u-boot is concerned. Any suggestion to find the problem? I do have error code listings, procedures I executed etc. if needed to verify. Best regards, Matti
_______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
