T4240 eSDHC host capabilities reigster should have VS33 bit define. hack the code to add the 3.3 voltage support
Signed-off-by: Roy Zang <[email protected]> Signed-off-by: Haijun Zhang <[email protected]> --- arch/powerpc/include/asm/config_mpc85xx.h | 1 + drivers/mmc/fsl_esdhc.c | 6 ++++++ 2 files changed, 7 insertions(+) diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h index 946ea97..84e79c8 100644 --- a/arch/powerpc/include/asm/config_mpc85xx.h +++ b/arch/powerpc/include/asm/config_mpc85xx.h @@ -596,6 +596,7 @@ #define CONFIG_SYS_FSL_SRIO_LIODN #define CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE #define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY +#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33 #define CONFIG_SYS_FSL_ERRATUM_A004468 #define CONFIG_SYS_FSL_ERRATUM_A_004934 #define CONFIG_SYS_FSL_ERRATUM_A005871 diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c index d4c1eef..b8b2907 100644 --- a/drivers/mmc/fsl_esdhc.c +++ b/drivers/mmc/fsl_esdhc.c @@ -545,6 +545,12 @@ int fsl_esdhc_initialize(bd_t *bis, struct fsl_esdhc_cfg *cfg) caps = caps & ~(ESDHC_HOSTCAPBLT_SRS | ESDHC_HOSTCAPBLT_VS18 | ESDHC_HOSTCAPBLT_VS30); #endif + +/* T4240 host controller capabilities register should have VS33 bit */ +#ifdef CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33 + caps = caps | ESDHC_HOSTCAPBLT_VS33; +#endif + if (caps & ESDHC_HOSTCAPBLT_VS18) voltage_caps |= MMC_VDD_165_195; if (caps & ESDHC_HOSTCAPBLT_VS30) -- 1.8.4 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
