Hi Haijun, On Oct 30, 2013, at 5:37 AM, Haijun Zhang wrote:
> Add some descriptions for esdhc register for easily using. > > Signed-off-by: Haijun Zhang <[email protected]> > --- > drivers/mmc/fsl_esdhc.c | 74 ++++++++++++++++++++++++------------------------- > 1 file changed, 37 insertions(+), 37 deletions(-) > > diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c > index a3b165e..0d0b748 100644 > --- a/drivers/mmc/fsl_esdhc.c > +++ b/drivers/mmc/fsl_esdhc.c > @@ -24,43 +24,43 @@ > DECLARE_GLOBAL_DATA_PTR; > > struct fsl_esdhc { > - uint dsaddr; > - uint blkattr; > - uint cmdarg; > - uint xfertyp; > - uint cmdrsp0; > - uint cmdrsp1; > - uint cmdrsp2; > - uint cmdrsp3; > - uint datport; > - uint prsstat; > - uint proctl; > - uint sysctl; > - uint irqstat; > - uint irqstaten; > - uint irqsigen; > - uint autoc12err; > - uint hostcapblt; > - uint wml; > - uint mixctrl; > - char reserved1[4]; > - uint fevt; > - uint admaes; > - uint adsaddr; > - char reserved2[160]; > - uint hostver; > - char reserved3[4]; > - uint dmaerraddr; > - char reserved4[4]; > - uint dmaerrattr; > - char reserved5[4]; > - uint hostcapblt2; > - char reserved6[8]; > - uint tcr; > - char reserved7[28]; > - uint sddirctl; > - char reserved8[712]; > - uint scr; > + uint dsaddr; /* SDMA system address register */ > + uint blkattr; /* Block attributes register */ > + uint cmdarg; /* Command argument register */ > + uint xfertyp; /* Transfer type register */ > + uint cmdrsp0; /* Command response 0 register */ > + uint cmdrsp1; /* Command response 1 register */ > + uint cmdrsp2; /* Command response 2 register */ > + uint cmdrsp3; /* Command response 3 register */ > + uint datport; /* Buffer data port register */ > + uint prsstat; /* Present state register */ > + uint proctl; /* Protocol control register */ > + uint sysctl; /* System Control Register */ > + uint irqstat; /* Interrupt status register */ > + uint irqstaten; /* Interrupt status enable register */ > + uint irqsigen; /* Interrupt signal enable register */ > + uint autoc12err; /* Auto CMD error status register */ > + uint hostcapblt; /* Host controller capabilities register */ > + uint wml; /* Watermark level register */ > + uint mixctrl; /* For USDHC */ > + char reserved1[4]; /* reserved */ > + uint fevt; /* Force event register */ > + uint admaes; /* ADMA error status register */ > + uint adsaddr; /* ADMA system address register */ > + char reserved2[160]; /* reserved */ > + uint hostver; /* Host controller version register */ > + char reserved3[4]; /* reserved */ > + uint dmaerraddr; /* DMA error address register */ > + char reserved4[4]; /* reserved */ > + uint dmaerrattr; /* DMA error attribute register */ > + char reserved5[4]; /* reserved */ > + uint hostcapblt2; /* Host controller capabilities register 2 */ > + char reserved6[8]; /* reserved */ > + uint tcr; /* Tuning control register */ > + char reserved7[28]; /* reserved */ > + uint sddirctl; /* SD direction control register */ > + char reserved8[712]; /* reserved */ > + uint scr; /* eSDHC control register */ > }; > > /* Return the XFERTYP flags for a given command and data packet */ > -- > 1.8.4 > > Applied, thanks Acked-by: Pantelis Antoniou <[email protected]> _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
