On Wed, Apr 22, 2009 at 07:52:40AM -0700, Steve Sakoman wrote: > Now things seem to initialize properly: > > U-Boot 2009.03 (Apr 22 2009 - 07:28:04) > > OMAP3503-GP rev 2, CPU-OPP2 L3-165MHz > Gumstix Overo board + LPDDR/NAND > DRAM: 256 MB > NAND: 256 MiB > In: serial > Out: serial > Err: serial > Initializing ethernet smc911x > smc911x: initializing > smc911x: detected LAN9221 controller > smc911x: phy initialized > smc911x: MAC 4a:18:56:55:9d:38
How did you set this MAC address? Does the hardware read it from a connected EEPROM or did you manually set it in your environment. If you face the latter case, you could try applying the patch I sent in some days ago. Without that patch, the hardware is not made aware of the configured address and hence the internal filter will drop all non-broadcast packets it receives. With this patch applied, however, the LAN9220 chip works well on our own PXA design. Maybe that helps. Daniel _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
