> > I'm working on git://git.denx.de/u-boot-at91.git branch clock > I also have an AT91SAM9263-EK, but with a 16.0 MHz main oscillator. > Everything is fine, as long as no changes were made. But if I undef > CONFIG_USB_ATMEL and CONFIG_CMD_USB, the board does not boot. Only > some cryptical characters appear after the "RomBOOT" term. It's the > same behavior as on my own board. use git://git.denx.de/u-boot-at91.git branch master
Best Regards, J. _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
