Jean-Christophe PLAGNIOL-VILLARD schrieb: >> I'm working on git://git.denx.de/u-boot-at91.git branch clock >> I also have an AT91SAM9263-EK, but with a 16.0 MHz main oscillator. >> Everything is fine, as long as no changes were made. But if I undef >> CONFIG_USB_ATMEL and CONFIG_CMD_USB, the board does not boot. Only >> some cryptical characters appear after the "RomBOOT" term. It's the >> same behavior as on my own board. > use git://git.denx.de/u-boot-at91.git branch master > > Best Regards, > J. > Thank you, it works now. But I have to apply the attached patch. Otherwise, I get a compiler error cpu/arm926ejs/at91/libat91.a(clock.o): In function `at91_clock_init': /data/home/danielg/git/u-boot-at91_new/cpu/arm926ejs/at91/clock.c:167: undefined reference to `at91_pll_rate'
--- From 730db691fabf958d1b3d74e678f7f47a0776df16 Mon Sep 17 00:00:00 2001 From: Daniel Gorsulowski <[email protected]> Date: Thu, 23 Apr 2009 15:37:16 +0200 Subject: [PATCH] at91: fixed cpu/arm926ejs/at91/clock.c Signed-off-by: Daniel Gorsulowski <[email protected]> --- cpu/arm926ejs/at91/clock.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/cpu/arm926ejs/at91/clock.c b/cpu/arm926ejs/at91/clock.c index 31e53b3..f776f70 100644 --- a/cpu/arm926ejs/at91/clock.c +++ b/cpu/arm926ejs/at91/clock.c @@ -126,6 +126,7 @@ static unsigned at91_pll_calc(unsigned main_freq, unsigned out_freq) fail: return 0; } +#endif static u32 at91_pll_rate(u32 freq, u32 reg) { @@ -141,7 +142,6 @@ static u32 at91_pll_rate(u32 freq, u32 reg) return freq; } -#endif int at91_clock_init(unsigned long main_clock) { -- 1.6.1 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
