On 20/11/2013 23:38, Fabio Estevam wrote: > From: Fabio Estevam <[email protected]> > > According to the README: > > "- CONFIG_SYS_SPD_BUS_NUM > If SPD EEPROM is on an I2C bus other than the first > one, specify here. Note that the value must resolve > to something your driver can deal with." > > There is no SPD EEPROM on the imx boards, so ged rid of this option. > > Signed-off-by: Fabio Estevam <[email protected]> > --- > include/configs/imx31_phycore.h | 1 - > include/configs/mx25pdk.h | 1 - > include/configs/mx35pdk.h | 1 - > include/configs/mx53ard.h | 1 - > include/configs/mx53evk.h | 1 - > include/configs/mx53loco.h | 1 - > include/configs/mx53smd.h | 1 - > 7 files changed, 7 deletions(-) > > diff --git a/include/configs/imx31_phycore.h b/include/configs/imx31_phycore.h > index 7b55695..ffb67c2 100644 > --- a/include/configs/imx31_phycore.h > +++ b/include/configs/imx31_phycore.h > @@ -37,7 +37,6 @@ > > #define CONFIG_SYS_I2C > #define CONFIG_SYS_I2C_MXC > -#define CONFIG_SYS_SPD_BUS_NUM 1 /* I2C2 */ > #define CONFIG_SYS_I2C_CLK_OFFSET I2C2_CLK_OFFSET > > #define CONFIG_MXC_UART > diff --git a/include/configs/mx25pdk.h b/include/configs/mx25pdk.h > index fb564b0..af6aafa 100644 > --- a/include/configs/mx25pdk.h > +++ b/include/configs/mx25pdk.h > @@ -115,7 +115,6 @@ > #define CONFIG_CMD_I2C > #define CONFIG_SYS_I2C > #define CONFIG_SYS_I2C_MXC > -#define CONFIG_SYS_SPD_BUS_NUM 0 /* I2C1 */ > > /* RTC */ > #define CONFIG_RTC_IMXDI > diff --git a/include/configs/mx35pdk.h b/include/configs/mx35pdk.h > index 4b4503c..0a46f4c 100644 > --- a/include/configs/mx35pdk.h > +++ b/include/configs/mx35pdk.h > @@ -42,7 +42,6 @@ > */ > #define CONFIG_SYS_I2C > #define CONFIG_SYS_I2C_MXC > -#define CONFIG_SYS_SPD_BUS_NUM 0 /* I2C1 */ > #define CONFIG_MXC_SPI > #define CONFIG_MXC_GPIO > > diff --git a/include/configs/mx53ard.h b/include/configs/mx53ard.h > index 60c40c8..797a637 100644 > --- a/include/configs/mx53ard.h > +++ b/include/configs/mx53ard.h > @@ -46,7 +46,6 @@ > #define CONFIG_CMD_I2C > #define CONFIG_SYS_I2C > #define CONFIG_SYS_I2C_MXC > -#define CONFIG_SYS_SPD_BUS_NUM 1 /* I2C2 */ > > /* MMC Configs */ > #define CONFIG_FSL_ESDHC > diff --git a/include/configs/mx53evk.h b/include/configs/mx53evk.h > index d0b5258..3f0d80a 100644 > --- a/include/configs/mx53evk.h > +++ b/include/configs/mx53evk.h > @@ -39,7 +39,6 @@ > #define CONFIG_CMD_I2C > #define CONFIG_SYS_I2C > #define CONFIG_SYS_I2C_MXC > -#define CONFIG_SYS_SPD_BUS_NUM 1 /* I2C2 */ > > /* PMIC Configs */ > #define CONFIG_POWER > diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h > index 7b735ab..ae43ea3 100644 > --- a/include/configs/mx53loco.h > +++ b/include/configs/mx53loco.h > @@ -73,7 +73,6 @@ > /* I2C Configs */ > #define CONFIG_SYS_I2C > #define CONFIG_SYS_I2C_MXC > -#define CONFIG_SYS_SPD_BUS_NUM 0 /* I2C1 */ > > /* PMIC Controller */ > #define CONFIG_POWER > diff --git a/include/configs/mx53smd.h b/include/configs/mx53smd.h > index c9618b4..a04e7c7 100644 > --- a/include/configs/mx53smd.h > +++ b/include/configs/mx53smd.h > @@ -36,7 +36,6 @@ > #define CONFIG_CMD_I2C > #define CONFIG_SYS_I2C > #define CONFIG_SYS_I2C_MXC > -#define CONFIG_SYS_SPD_BUS_NUM 1 /* I2C2 */ > > /* MMC Configs */ > #define CONFIG_FSL_ESDHC >
Acked-by: Stefano Babic <[email protected]> Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected] ===================================================================== _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
