On 11/27/2013 06:10 PM, Thomas Petazzoni wrote:
Dear Nikita Kiryanov,
On Wed, 27 Nov 2013 17:52:31 +0200, Nikita Kiryanov wrote:
The zeroing of the cnt register also happens in other places in the
driver, and it is entirely possible that they should be removed for
OMAP3s as well.
In my patch I removed it only for i2c_write() because the original
driver also zeroed the cnt register in I/O functions- except in
i2c_write(), and I decided to follow the original driver's lead.
What happens if you remove all the lines that zero the cnt register?
It works. I've removed all the writew(0, ...cnt register...), and then
I've done at least 20 boots of the IGEP board, and all of them were
successful.
I've attached the ugly patch that comments out all of those cases. Of
course, it's not a patch intended for merging, just to show which
locations I've commented.
Since I've absolutely no idea of the background for the problem, would
you mind submitting a proper patch with a good explanation? I will be
happy to test it, of course.
Sure. I'm about to leave office though, so I'll prepare it tomorrow.
Thanks!
Thomas
--
Regards,
Nikita.
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
