Thanks Stefano, I didn't notice that difference until you pointed it out. Till now, I was under the assumption that both toolchains were (feature-wise) identical. And I *almost* sent a complaint letter to Linaro about this too ... Guess, I've got more to learn than I anticipated.
Sincerely, Abraham V. On Thu, Nov 28, 2013 at 12:52 PM, Stefano Babic <sba...@denx.de> wrote: > Hi Abraham, > > On 28/11/2013 05:22, Abraham V. wrote: > > > test/built-in.o --end-group > > /home/abraham/SPACE/temp_uboot/arch/arm/lib/eabi_compat.o -L > > > /home/abraham/SPACE/BISQUARE/source/uboot_update/gcc-linaro-arm/bin/../lib/gcc/arm-linux-gnueabihf/4.8.2 > > -lgcc -Map u-boot.map -o u-boot > > > /home/abraham/SPACE/BISQUARE/source/uboot_update/gcc-linaro-arm/bin/arm-linux-gnueabihf-ld.bfd: > > error: > > > /home/abraham/SPACE/BISQUARE/source/uboot_update/gcc-linaro-arm/bin/../lib/gcc/arm-linux-gnueabihf/4.8.2/libgcc.a(bpabi.o) > > uses VFP register arguments, u-boot does not > > The most evident cause here is that you use a -hf toolchain with support > for hard float point. U-Boot does not support it: there is no need of it. > > This is the reason why it works using Mentor's toolchain. Even if you > use the Linaro's supplied with Ubuntu, it works. > > Best regards, > Stefano Babic > > -- > ===================================================================== > DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel > HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany > Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de > ===================================================================== >
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot