On 23:26 Fri 24 Apr , Jean-Christophe PLAGNIOL-VILLARD wrote: > On 09:40 Tue 14 Apr , Tom Rix wrote: > > Zoom2 is a new board from Texas Instruments and LogicPD > > > > The logicpd web site is a good source for general information on this board. > > Please start looking here if the below links are broken. > > http://www.logicpd.com > > > > This is a pdf of the product > > http://www.logicpd.com/sites/default/files/1012659A_Zoom_OMAP34x-II_MDP_Brief.pdf > > This is the product description web page > > http://www.logicpd.com/products/development-kits/texas-instruments-zoom%E2%84%A2-omap34x-ii-mdp > > > > This patch provides a zoom2 base target by copying zoom1 and by making some > > obvious changes. > > > > To configure, run > > make omap3_zoom2_config > > > > Signed-off-by: Tom Rix <[email protected]> > > --- > > MAINTAINERS | 4 + > > MAKEALL | 1 + > > Makefile | 3 + > > board/omap3/common/Makefile | 1 + > > board/omap3/zoom2/Makefile | 49 ++++++++ > > board/omap3/zoom2/config.mk | 33 ++++++ > > board/omap3/zoom2/u-boot.lds | 63 +++++++++++ > > board/omap3/zoom2/zoom2.c | 76 +++++++++++++ > > board/omap3/zoom2/zoom2.h | 151 +++++++++++++++++++++++++ > > doc/README.omap3 | 13 ++ > > include/configs/omap3_zoom2.h | 247 > > +++++++++++++++++++++++++++++++++++++++++ > > 11 files changed, 641 insertions(+), 0 deletions(-) > > create mode 100644 board/omap3/zoom2/Makefile > > create mode 100644 board/omap3/zoom2/config.mk > > create mode 100644 board/omap3/zoom2/u-boot.lds > > create mode 100644 board/omap3/zoom2/zoom2.c > > create mode 100644 board/omap3/zoom2/zoom2.h > > create mode 100644 include/configs/omap3_zoom2.h > > > > diff --git a/MAINTAINERS b/MAINTAINERS > > index 03d59b9..c2a4e33 100644 > > --- a/MAINTAINERS > > +++ b/MAINTAINERS > > @@ -611,6 +611,10 @@ Stelian Pop <[email protected]> > > at91sam9263ek ARM926EJS (AT91SAM9263 SoC) > > at91sam9rlek ARM926EJS (AT91SAM9RL SoC) > > > > +Tom Rix <[email protected]> > > + > > + omap3_zoom2 ARM CORTEX-A8 (OMAP3xx SoC) > > + > > Stefan Roese <[email protected]> > > > > ixdpg425 xscale > > diff --git a/MAKEALL b/MAKEALL > > index e4eb42b..c72e810 100755 > > --- a/MAKEALL > > +++ b/MAKEALL > > @@ -561,6 +561,7 @@ LIST_ARM_CORTEX_A8=" \ > > omap3_evm \ > > omap3_pandora \ > > omap3_zoom1 \ > > + omap3_zoom2 \ > > " > > > > ######################################################################### > > diff --git a/Makefile b/Makefile > > index e91c051..724ed51 100644 > > --- a/Makefile > > +++ b/Makefile > > @@ -2980,6 +2980,9 @@ omap3_pandora_config : unconfig > > omap3_zoom1_config : unconfig > > @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom1 omap3 omap3 > > > > +omap3_zoom2_config : unconfig > > + @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom2 omap3 omap3 > > + > > ######################################################################### > > ## XScale Systems > > ######################################################################### > > diff --git a/board/omap3/common/Makefile b/board/omap3/common/Makefile > > index 7b892fa..b8a0b14 100644 > > --- a/board/omap3/common/Makefile > > +++ b/board/omap3/common/Makefile > > @@ -33,6 +33,7 @@ COBJS-$(CONFIG_OMAP3_BEAGLE) += power.o > > COBJS-$(CONFIG_OMAP3_OVERO) += power.o > > COBJS-$(CONFIG_OMAP3_PANDORA) += power.o > > COBJS-$(CONFIG_OMAP3_ZOOM1) += power.o > > +COBJS-$(CONFIG_OMAP3_ZOOM2) += power.o > how many CONFIG_X_BOARDS will we have? > > It's time to create a functionnality CONFIG_ > (it can be done in an other patch but no other new board will be allow to do > it) > > > > COBJS := $(COBJS-y) > > SRCS := $(COBJS:.o=.c) > > diff --git a/board/omap3/zoom2/Makefile b/board/omap3/zoom2/Makefile > > new file mode 100644 > > index 0000000..088b8cb > > --- /dev/null > > +++ b/board/omap3/zoom2/Makefile > > + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, > > + * MA 02111-1307 USA > > + */ > > + > > +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") > > +OUTPUT_ARCH(arm) > > +ENTRY(_start) > > +SECTIONS > > +{ > > + . = 0x00000000; > > + > > + . = ALIGN(4); > > + .text : > > + { > > + cpu/arm_cortexa8/start.o (.text) > > + *(.text) > > + } > > + > > + . = ALIGN(4); > > + .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) } > > + > > + .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } > > + __exidx_start = .; > > + .ARM.exidx : { *(.ARM.exidx* .gnu.linkonce.armexidx.*) } > > + __exidx_end = .; > as said precedently .ARM.extab & .ARM.exidx is not needed please remove I've seen you fix it in the 10th patch
Best Regards, J. _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
