Hi Minkyu Kang, Can we get this patch set reviewed..
On Wed, Dec 11, 2013 at 9:55 AM, Rajeshwari Birje <rajeshwari.bi...@gmail.com> wrote: > Hi Minkyu Kang, > > Please do let me know if any coments on this patch set. > > On Mon, Dec 9, 2013 at 2:20 PM, Rajeshwari S Shinde > <rajeshwar...@samsung.com> wrote: >> This patch adds basic board support for SMDK5420 board. >> These patches are tested for booting fine on EVT1 SMDK5420. >> >> Changes in V2: >> - Corrected a compilation issue for SMDK5420. >> >> Changes in V3: >> - Add patch to support variable size SPL support >> - Add patch to disable SMU for eMMC. >> >> Changes in V4: >> - Added check for MAX77686 pmic compilation. >> - Added correct calculation of gpio based addresses. >> - Rebased on the latest u-boot code. >> - Removed patches for UART and TZPC changes as >> they were not needed. >> - Added flag to disable SMU for eMMC. >> >> Changes in V5: >> - Moved functions board_mmc_init and board_eth_init >> to common/board.c in case of device tree support. >> >> Changes in V6: >> - Rebased on the latest mainline branch. >> - Moved the definitions for SMU to arch/arm dwmmc.h >> >> Changes in V7: >> - Removed below patch as it is already merged >> "DWMMC: SMDK5420: Disable SMU for eMMC" >> - Corrected the multi line comments and removal of >> blank spaces and lines. >> - Corrected the license. >> >> Changes in V8: >> - corrected the if loops with if conditions of >> pro_id and cpu_id. >> >> Changes in V9: >> - Added macros to get the base address >> - Rebased on latest code. >> >> Changes in V10: >> - Added new structures for Power and DMC registers for >> 5420. >> - Changed the input parameters for common dmc functions. >> - Removed unnecesarry blank lines and added where ever required. >> >> Rajeshwari S Shinde (11): >> EXYNOS5: Create a common board file >> Exynos5420: Add base addresses for 5420 >> EXYNOS5420: Add power register structure. >> EXYNOS5420: Add dmc and phy_control register structure >> Exynos5420: Add clock initialization for 5420 >> Exynos5420: Add DDR3 initialization for 5420 >> Exynos5420: Add support for 5420 in pinmux and gpio >> Exynos5420: Add base patch for SMDK5420 >> DTS: Add dts support for SMDK5420 >> Config: Add initial config for SMDK5420 >> SPL: EXYNOS: Prepare for variable size SPL support >> >> arch/arm/cpu/armv7/exynos/clock.c | 280 ++++++++- >> arch/arm/cpu/armv7/exynos/clock_init.h | 17 + >> arch/arm/cpu/armv7/exynos/clock_init_exynos5.c | 352 ++++++++++- >> arch/arm/cpu/armv7/exynos/dmc_common.c | 60 +- >> arch/arm/cpu/armv7/exynos/dmc_init_ddr3.c | 439 ++++++++++++- >> arch/arm/cpu/armv7/exynos/exynos5_setup.h | 764 ++++++++++++++++------ >> arch/arm/cpu/armv7/exynos/pinmux.c | 260 +++++++- >> arch/arm/dts/exynos5.dtsi | 198 ++++++ >> arch/arm/dts/exynos5250.dtsi | 194 +----- >> arch/arm/dts/exynos5420.dtsi | 70 +++ >> arch/arm/include/asm/arch-exynos/board.h | 17 + >> arch/arm/include/asm/arch-exynos/clk.h | 1 + >> arch/arm/include/asm/arch-exynos/clock.h | 494 +++++++++++++++ >> arch/arm/include/asm/arch-exynos/cpu.h | 52 +- >> arch/arm/include/asm/arch-exynos/dmc.h | 177 ++++++ >> arch/arm/include/asm/arch-exynos/gpio.h | 143 ++++- >> arch/arm/include/asm/arch-exynos/periph.h | 3 + >> arch/arm/include/asm/arch-exynos/power.h | 837 >> +++++++++++++++++++++++++ >> board/samsung/common/Makefile | 4 + >> board/samsung/common/board.c | 410 ++++++++++++ >> board/samsung/dts/exynos5420-smdk5420.dts | 169 +++++ >> board/samsung/smdk5250/exynos5-dt.c | 352 +---------- >> board/samsung/smdk5250/smdk5250.c | 182 +----- >> board/samsung/smdk5420/Makefile | 11 + >> board/samsung/smdk5420/smdk5420.c | 159 +++++ >> board/samsung/smdk5420/smdk5420_spl.c | 52 ++ >> boards.cfg | 1 + >> include/configs/arndale.h | 1 + >> include/configs/exynos5-dt.h | 289 +++++++++ >> include/configs/exynos5250-dt.h | 283 +-------- >> include/configs/smdk5420.h | 56 ++ >> spl/Makefile | 7 +- >> tools/Makefile | 3 +- >> tools/mkexynosspl.c | 167 +++-- >> 34 files changed, 5189 insertions(+), 1315 deletions(-) >> create mode 100644 arch/arm/dts/exynos5.dtsi >> create mode 100644 arch/arm/dts/exynos5420.dtsi >> create mode 100644 arch/arm/include/asm/arch-exynos/board.h >> create mode 100644 board/samsung/common/board.c >> create mode 100644 board/samsung/dts/exynos5420-smdk5420.dts >> create mode 100644 board/samsung/smdk5420/Makefile >> create mode 100644 board/samsung/smdk5420/smdk5420.c >> create mode 100644 board/samsung/smdk5420/smdk5420_spl.c >> create mode 100644 include/configs/exynos5-dt.h >> create mode 100644 include/configs/smdk5420.h >> >> -- >> 1.7.12.4 >> >> _______________________________________________ >> U-Boot mailing list >> U-Boot@lists.denx.de >> http://lists.denx.de/mailman/listinfo/u-boot > > > > -- > Regards, > Rajeshwari Shinde -- Regards, Rajeshwari Shinde _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot