On Tue, Dec 17, 2013 at 12:18 PM, Fabio Estevam <[email protected]> wrote: > Hi Otavio, > > On Tue, Nov 26, 2013 at 1:59 PM, Otavio Salvador > <[email protected]> wrote: > >>> isn't the last change (enabling bypass) sufficient to fix the problem >>> or do you also need the 2 power_down before ? >> >> It does indeed. I did a full test cycle from cold boot and also from >> inside system reboot and it works. > > What do you get on your board when you do? > > => md.l 0x20c8140 1
Just to clarify, please run the command above with the original U-boot, ie, without your workaround of setting the ldo bypass mode. Regards, Fabio Estevam _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
