CC Fabio:
On 16/12/2013 23:44, Otavio Salvador wrote:
> This reads the kernel, ftd and boot into ubifs filesystem. While on
> that, the SD firmware filename definition has been moved next to the
> other SD related commands.
>
> Signed-off-by: Otavio Salvador <ota...@ossystems.com.br>
> ---
> Changes in v3: None
> Changes in v2: None
>
> include/configs/mx28evk.h | 18 +++++++++++++++++-
> 1 file changed, 17 insertions(+), 1 deletion(-)
>
> diff --git a/include/configs/mx28evk.h b/include/configs/mx28evk.h
> index 3de0599..6c9fa00 100644
> --- a/include/configs/mx28evk.h
> +++ b/include/configs/mx28evk.h
> @@ -162,7 +162,6 @@
> #define CONFIG_EXTRA_ENV_SETTINGS \
> "update_nand_full_filename=u-boot.nand\0" \
> "update_nand_firmware_filename=u-boot.sb\0" \
> - "update_sd_firmware_filename=u-boot.sd\0" \
> "update_nand_firmware_maxsz=0x100000\0" \
> "update_nand_stride=0x40\0" /* MX28 datasheet ch. 12.12 */ \
> "update_nand_count=0x4\0" /* MX28 datasheet ch. 12.12 */ \
> @@ -190,6 +189,23 @@
> "nand write ${loadaddr} ${fcb_sz} ${filesize} ; " \
> "nand write ${loadaddr} ${fw_off} ${filesize} ; " \
> "fi\0" \
> + "nandargs=setenv bootargs console=${console_mainline},${baudrate} " \
> + "rootfstype=ubifs ubi.mtd=6 root=ubi0_0 ${mtdparts}\0" \
> + "nandboot=" /* Boot from NAND */ \
> + "mtdparts default; " \
> + "run nandargs; " \
> + "nand read ${loadaddr} kernel 0x00400000; " \
> + "if test ${boot_fdt} = yes; then " \
> + "nand read ${fdt_addr} fdt 0x00080000; " \
> + "bootm ${loadaddr} - ${fdt_addr}; " \
> + "else " \
> + "if test ${boot_fdt} = no; then " \
> + "bootm; " \
> + "else " \
> + "echo \"ERROR: Set boot_fdt to yes or no.\"; " \
> + "fi; " \
> + "fi\0" \
> + "update_sd_firmware_filename=u-boot.sd\0" \
> "update_sd_firmware=" /* Update the SD firmware partition */ \
> "if mmc rescan ; then " \
> "if tftp ${update_sd_firmware_filename} ; then " \
>
Again, I will not block patches if we have not (yet) another solution.
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de
=====================================================================
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
