On Wed, Dec 18, 2013 at 03:07:47PM -0500, Tom Rini wrote: > On Tue, Dec 10, 2013 at 03:02:10PM +0530, Lokesh Vutla wrote: > > > This Patch series updates support for AM4372 EPOS and GP EVM boards. > > AM4372 is a low cost Cortex-A9 based application processor targeted at > > existing > > ARM9/ARM11 base of customers that need more processing capabilities. > > Currently there are two boards with AM4372 SoC: EPOS and GP EVM. > > Except for few differences like oscillator clock and SDRAM both EPOS and GP > > EVM > > boards are similar. > > EPOS EVM: > > OSC clk : 25MHz > > DDR : LPDDR2 @ 266MHz (MT42L256M32D2LG-25 WT:A) > > GP EVM: > > OSC clk : 24MHz > > DDR : DDR3 @ 400MHz(MT41K512M8RH) > > > > This patch series is applied on top of Mainline U-Boot Tree and two > > patches mentioned below: > > git://git.denx.de/u-boot.git master > > http://patchwork.ozlabs.org/patch/288175/ > > > > Testing: > > -> Boot tested on AM4372 EPOS and GP EVMs, Beaglebone Black. > > -> verified MAKEALL -s am33xx. > > -> Ran checkpatch on all patches. > > > > Changes Since V2: > > -> Updating the base offsets only for AM43xx > > -> Populated DPLLs data for all OPPs and SYS CLK inputs and the correct > > values > > to be read from eFuse. > > -> Seperated out ioregs changes into a new patch. > > > > Changes Since V1: > > As per Vaibhav's and Tom's Comments: > > -> Updated the mux data not to use DSPULLUDEN. > > -> Reused the emif4d file for configuring emif4d5 registers. > > -> Updated the code with comments. > > -> Rebased on top of Current U-Boot mainline. > > > > Lokesh Vutla (12): > > ARM: AM43xx: Update the base addresses of modules > > ARM: AM43xx: Adapt to ti_armv7_common.h config file > > ARM: AM43xx: Add L2 Support > > ARM: AM43xx: Add extra ENV settings > > ARM: AM43xx: Select clk source for Timer2 > > ARM: AM43xx: Update Current Booting devices list > > ARM: AM43xx: mux: Update mux data > > ARM: AM43xx: clocks: Update DPLL details > > ARM: AM33xx+: Update ioregs to pass different values > > ARM: AM43xx: EPOS_EVM: Add support for LPDDR2 > > ARM: AM43xx: GP_EVM: Add support for DDR3 > > ARM: AM43xx: Add Maintainer > > > > Sekhar Nori (2): > > ARM: AM43XX: board: add support for reading onboard EEPROM > > ARM: AM43XX: Add CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG support > > > > arch/arm/cpu/armv7/am33xx/clock.c | 12 +- > > arch/arm/cpu/armv7/am33xx/clock_am33xx.c | 15 + > > arch/arm/cpu/armv7/am33xx/clock_am43xx.c | 12 +- > > arch/arm/cpu/armv7/am33xx/ddr.c | 146 +++++++- > > arch/arm/cpu/armv7/am33xx/emif4.c | 25 +- > > arch/arm/cpu/armv7/omap-common/emif-common.c | 14 - > > arch/arm/include/asm/arch-am33xx/clock.h | 7 +- > > arch/arm/include/asm/arch-am33xx/clocks_am33xx.h | 3 + > > arch/arm/include/asm/arch-am33xx/cpu.h | 24 +- > > arch/arm/include/asm/arch-am33xx/ddr_defs.h | 41 ++- > > arch/arm/include/asm/arch-am33xx/gpio.h | 12 + > > arch/arm/include/asm/arch-am33xx/hardware.h | 7 - > > arch/arm/include/asm/arch-am33xx/hardware_am33xx.h | 2 + > > arch/arm/include/asm/arch-am33xx/hardware_am43xx.h | 16 + > > arch/arm/include/asm/arch-am33xx/mux_am43xx.h | 45 +++ > > arch/arm/include/asm/arch-am33xx/omap.h | 4 +- > > arch/arm/include/asm/arch-am33xx/spl.h | 13 +- > > arch/arm/include/asm/emif.h | 26 ++ > > board/isee/igep0033/board.c | 10 +- > > board/phytec/pcm051/board.c | 12 +- > > board/siemens/dxr2/board.c | 10 +- > > board/siemens/pxm2/board.c | 10 +- > > board/siemens/rut/board.c | 10 +- > > board/ti/am335x/board.c | 40 ++- > > board/ti/am43xx/board.c | 355 > > +++++++++++++++++++- > > board/ti/am43xx/board.h | 36 ++ > > board/ti/am43xx/mux.c | 35 +- > > board/ti/ti814x/evm.c | 4 +- > > board/ti/ti816x/evm.c | 12 +- > > boards.cfg | 2 +- > > include/configs/am43xx_evm.h | 204 +++++------ > > 31 files changed, 983 insertions(+), 181 deletions(-) > > Applied to u-boot-ti/master, thanks!
Note that I've had to update this patch series to fix cm_t335 support and cover pcm051_rev3. Also the dxr2 conversion wasn't quite right (it should have been populating based on settings.ddr3.ioctrl_val) so I fixed that up. -- Tom
signature.asc
Description: Digital signature
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot