On Fri, Jan 3, 2014 at 4:10 PM, Vivek Gautam <[email protected]> wrote:
> The gpio_*() apis require the exact gpio line number to deduce
> the gpio bank and the gpio pin addresses.
> So fix the gpio number for VBUS used for EHCI ports as well as
> XHCI ports on exynos5250 boards.
>
> Signed-off-by: Vivek Gautam <[email protected]>
> Cc: Julius Werner <[email protected]>
> Cc: Minkyu Kang <[email protected]>
> Cc: Marek Vasut <[email protected]>
> ---
Based on u-boot-samsung 'master' branch.
Tested on smkd5250 and snow board for EHCI and XHCI ports.
> board/samsung/dts/exynos5250-smdk5250.dts | 2 +-
> board/samsung/dts/exynos5250-snow.dts | 4 ++--
> 2 files changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/board/samsung/dts/exynos5250-smdk5250.dts
> b/board/samsung/dts/exynos5250-smdk5250.dts
> index c4ed346..9020382 100644
> --- a/board/samsung/dts/exynos5250-smdk5250.dts
> +++ b/board/samsung/dts/exynos5250-smdk5250.dts
> @@ -146,6 +146,6 @@
> };
>
> ehci@12110000 {
> - samsung,vbus-gpio = <&gpio 0xbe 0>; /* X26 */
> + samsung,vbus-gpio = <&gpio 0x316 0>; /* X26 */
> };
> };
> diff --git a/board/samsung/dts/exynos5250-snow.dts
> b/board/samsung/dts/exynos5250-snow.dts
> index 091cdb9..9b48a0c 100644
> --- a/board/samsung/dts/exynos5250-snow.dts
> +++ b/board/samsung/dts/exynos5250-snow.dts
> @@ -110,11 +110,11 @@
> };
>
> ehci@12110000 {
> - samsung,vbus-gpio = <&gpio 0xb1 0>; /* X11 */
> + samsung,vbus-gpio = <&gpio 0x309 0>; /* X11 */
> };
>
> xhci@12000000 {
> - samsung,vbus-gpio = <&gpio 0xbf 0>; /* X27 */
> + samsung,vbus-gpio = <&gpio 0x317 0>; /* X27 */
> };
>
> tmu@10060000 {
> --
> 1.7.10.4
>
> _______________________________________________
> U-Boot mailing list
> [email protected]
> http://lists.denx.de/mailman/listinfo/u-boot
--
Best Regards
Vivek Gautam
Samsung R&D Institute, Bangalore
India
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot
