On Monday 06 January 2014 01:10 PM, Jagan Teki wrote:
On Mon, Jan 6, 2014 at 12:39 PM, Sourav Poddar<sourav.pod...@ti.com>  wrote:
On Saturday 04 January 2014 08:34 PM, Jagannadha Sutradharudu Teki wrote:
QEB code comprises of couple of flash register read/write operations,
this patch moved flash register operations on to sf_op

Signed-off-by: Jagannadha Sutradharudu Teki<jaga...@xilinx.com>
---
   drivers/mtd/spi/sf_internal.h | 11 ++++---
   drivers/mtd/spi/sf_ops.c      | 75
+++++++++++++++----------------------------
   drivers/mtd/spi/sf_probe.c    | 44 +++++++++++++++++++++++++
   3 files changed, 77 insertions(+), 53 deletions(-)

diff --git a/drivers/mtd/spi/sf_internal.h b/drivers/mtd/spi/sf_internal.h
index c69b53d..c77961f 100644
--- a/drivers/mtd/spi/sf_internal.h
+++ b/drivers/mtd/spi/sf_internal.h
@@ -101,14 +101,17 @@ int spi_flash_cmd_write(struct spi_slave *spi, const
u8 *cmd, size_t cmd_len,
   /* Flash erase(sectors) operation, support all possible erase commands
*/
   int spi_flash_cmd_erase_ops(struct spi_flash *flash, u32 offset, size_t
len);

+/* Read the status register */
+int spi_flash_cmd_read_status(struct spi_flash *flash, u8 *rs);
+
   /* Program the status register */
   int spi_flash_cmd_write_status(struct spi_flash *flash, u8 sr);

-/* Set quad enbale bit for macronix flashes */
-int spi_flash_set_qeb_mxic(struct spi_flash *flash);
+/* Read the config register */
+int spi_flash_cmd_read_config(struct spi_flash *flash, u8 *rc);

-/* Set quad enbale bit for winbond and spansion flashes */
-int spi_flash_set_qeb_winspan(struct spi_flash *flash);
+/* Program the config register */
+int spi_flash_cmd_write_config(struct spi_flash *flash, u8 wc);

   /* Enable writing on the SPI flash */
   static inline int spi_flash_cmd_write_enable(struct spi_flash *flash)
diff --git a/drivers/mtd/spi/sf_ops.c b/drivers/mtd/spi/sf_ops.c
index 9681042..658294c 100644
--- a/drivers/mtd/spi/sf_ops.c
+++ b/drivers/mtd/spi/sf_ops.c
@@ -24,94 +24,71 @@ static void spi_flash_addr(u32 addr, u8 *cmd)
         cmd[3] = addr>>   0;
   }

-int spi_flash_cmd_write_status(struct spi_flash *flash, u8 sr)
+int spi_flash_cmd_read_status(struct spi_flash *flash, u8 *rs)
   {
-       u8 cmd;
         int ret;
+       u8 cmd;

-       cmd = CMD_WRITE_STATUS;
-       ret = spi_flash_write_common(flash,&cmd, 1,&sr, 1);
+       cmd = CMD_READ_STATUS;
+       ret = spi_flash_read_common(flash,&cmd, 1, rs, 1);

         if (ret<   0) {
-               debug("SF: fail to write status register\n");
+               debug("SF: fail to read status register\n");
                 return ret;
         }

         return 0;
   }

-#ifdef CONFIG_SPI_FLASH_MACRONIX
-int spi_flash_set_qeb_mxic(struct spi_flash *flash)
+int spi_flash_cmd_write_status(struct spi_flash *flash, u8 sr)
   {
-       u8 qeb_status;
         u8 cmd;
         int ret;

-       cmd = CMD_READ_STATUS;
-       ret = spi_flash_read_common(flash,&cmd, 1,&qeb_status, 1);
+       cmd = CMD_WRITE_STATUS;
+       ret = spi_flash_write_common(flash,&cmd, 1,&sr, 1);

         if (ret<   0) {
-               debug("SF: fail to read status register\n");
+               debug("SF: fail to write status register\n");
                 return ret;
         }

-       if (qeb_status&   STATUS_QEB_MXIC) {

-               debug("SF: Quad enable bit is already set\n");
-       } else {
-               ret = spi_flash_cmd_write_status(flash, STATUS_QEB_MXIC);
-               if (ret<   0)
-                       return ret;
-       }
-
-       return ret;
+       return 0;
   }
-#endif

   #if defined(CONFIG_SPI_FLASH_SPANSION) ||
defined(CONFIG_SPI_FLASH_WINBOND)
-static int spi_flash_cmd_write_config(struct spi_flash *flash, u8 cr)
+int spi_flash_cmd_read_config(struct spi_flash *flash, u8 *rc)
   {
-       u8 data[2];
-       u8 cmd;
         int ret;
+       u8 cmd;

-       cmd = CMD_READ_STATUS;
-       ret = spi_flash_read_common(flash,&cmd, 1,&data[0], 1);
+       cmd = CMD_READ_CONFIG;
+       ret = spi_flash_read_common(flash,&cmd, 1, rc, 1);

         if (ret<   0) {
-               debug("SF: fail to read status register\n");
-               return ret;
-       }
-
-       cmd = CMD_WRITE_STATUS;
-       data[1] = cr;
-       ret = spi_flash_write_common(flash,&cmd, 1,&data, 2);

-       if (ret) {
-               debug("SF: fail to write config register\n");
+               debug("SF: fail to read config register\n");
                 return ret;
         }

         return 0;
   }

-int spi_flash_set_qeb_winspan(struct spi_flash *flash)
+int spi_flash_cmd_write_config(struct spi_flash *flash, u8 wc)
   {
-       u8 qeb_status;
+       u8 data[2];
         u8 cmd;
         int ret;

-       cmd = CMD_READ_CONFIG;
-       ret = spi_flash_read_common(flash,&cmd, 1,&qeb_status, 1);

-       if (ret<   0) {
-               debug("SF: fail to read config register\n");
+       ret = spi_flash_cmd_read_status(flash,&data[0]);

+       if (ret<   0)
                 return ret;
-       }

-       if (qeb_status&   STATUS_QEB_WINSPAN) {

-               debug("SF: Quad enable bit is already set\n");
-       } else {
-               ret = spi_flash_cmd_write_config(flash,
STATUS_QEB_WINSPAN);
-               if (ret<   0)
-                       return ret;
+       cmd = CMD_WRITE_STATUS;
+       data[1] = wc;
+       ret = spi_flash_write_common(flash,&cmd, 1,&data, 2);

+       if (ret) {
+               debug("SF: fail to write config register\n");
+               return ret;
         }

-       return ret;
+       return 0;
   }
   #endif

diff --git a/drivers/mtd/spi/sf_probe.c b/drivers/mtd/spi/sf_probe.c
index cbde350..8715b7c 100644
--- a/drivers/mtd/spi/sf_probe.c
+++ b/drivers/mtd/spi/sf_probe.c
@@ -28,6 +28,50 @@ static u8 spi_read_cmds_array[] = {
         CMD_READ_QUAD_IO_FAST,
   };

+#ifdef CONFIG_SPI_FLASH_MACRONIX
+static int spi_flash_set_qeb_mxic(struct spi_flash *flash)
+{
+       u8 qeb_status;
+       int ret;
+
+       ret = spi_flash_cmd_read_status(flash,&qeb_status);
+       if (ret<   0)
+               return ret;
+
+       if (qeb_status&   STATUS_QEB_MXIC) {

+               debug("SF: mxic: QEB is already set\n");
+       } else {
+               ret = spi_flash_cmd_write_status(flash, STATUS_QEB_MXIC);
+               if (ret<   0)
+                       return ret;
+       }
+
+       return ret;
+}
+#endif
+
+#if defined(CONFIG_SPI_FLASH_SPANSION) ||
defined(CONFIG_SPI_FLASH_WINBOND)
+static int spi_flash_set_qeb_winspan(struct spi_flash *flash)
+{
+       u8 qeb_status;
+       int ret;
+
+       ret = spi_flash_cmd_read_config(flash,&qeb_status);
+       if (ret<   0)
+               return ret;
+
+       if (qeb_status&   STATUS_QEB_WINSPAN) {

+               debug("SF: winspan: QEB is already set\n");
+       } else {
+               ret = spi_flash_cmd_write_config(flash,
STATUS_QEB_WINSPAN);
+               if (ret<   0)
+                       return ret;
+       }
+
+       return ret;
+}
+#endif
+

This looks to be the generic function used to set quad mode for both
spansion and
winbond flashes? If its the case, function name should be more generic and
without a
_winbond appended to it. Same goes with the other macros used in the
function.
Thats what I reflected on the name right - as this code specific to
winbond and spansion -
I named as *_winspan() and macro looks the same *_WINSPAN

Any comments?

Ok, yes, overlooked its winspan. its fine then.
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to