[U-Boot] [PATCH] serial: uartlite: Reset RX/TX in init

[Michal Simek]

Just to be sure that there is no pending data.

Signed-off-by: Michal Simek <michal.si...@xilinx.com>
---

 drivers/serial/serial_xuartlite.c | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/drivers/serial/serial_xuartlite.c 
b/drivers/serial/serial_xuartlite.c
index e613994..988438e 100644
--- a/drivers/serial/serial_xuartlite.c
+++ b/drivers/serial/serial_xuartlite.c
@@ -18,10 +18,14 @@
 #define SR_RX_FIFO_VALID_DATA  0x01 /* data in receive FIFO */
 #define SR_RX_FIFO_FULL                0x02 /* receive FIFO full */

+#define ULITE_CONTROL_RST_TX   0x01
+#define ULITE_CONTROL_RST_RX   0x02
+
 struct uartlite {
        unsigned int rx_fifo;
        unsigned int tx_fifo;
        unsigned int status;
+       unsigned int control;
 };

 static struct uartlite *userial_ports[4] = {
@@ -75,8 +79,16 @@ static int uartlite_serial_tstc(const int port)

 static int uartlite_serial_init(const int port)
 {
-       if (userial_ports[port])
+       struct uartlite *regs = userial_ports[port];
+
+       if (regs) {
+               out_be32(&regs->control, 0);
+               out_be32(&regs->control,
+                        ULITE_CONTROL_RST_RX | ULITE_CONTROL_RST_TX);
+               in_be32(&regs->control);
                return 0;
+       }
+
        return -1;
 }

--
1.8.2.3

pgpI8KfjsTjvr.pgp
Description: PGP signature

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot