On 01/30/2014 03:30 AM, York Sun wrote: > On 01/27/2014 02:49 AM, Valentin Longchamp wrote: >> From: Rainer Boschung <rainer.bosch...@keymile.com> >> >> -uses common deblocking algorithm from ../common/common.c > > I don't see any algorithm in the common.c file.
The file is board/keymile/common/common.c, where the i2c_make_abort() and the i2c_write_start_seq() functions are defined. I guess that's what Rainer means with "algorithm". I agree that the relative path for the file is not very fortunate and that's why you have not found the functions. > >> -supports deblocking of of I2C-bus1 by means of QRIO GPIO >> - SCL1 = GPIO_A16 >> - SDA1 = GPIO_A17 >> >> QRIO GPIOs act in an open-drain-like manner, for 0 GPIO drives >> low and for 1 the GPIO is an input and must be pulled up externaly! >> >> Signed-off-by: Rainer Boschung <rainer.bosch...@keymile.com> >> Signed-off-by: Valentin Longchamp <valentin.longch...@keymile.com> >> --- >> >> Changes in v2: None >> >> board/keymile/kmp204x/kmp204x.c | 53 >> ++++++++++++++++++++++++++++++++++--- >> include/configs/km/kmp204x-common.h | 10 +++++++ >> 2 files changed, 60 insertions(+), 3 deletions(-) >> >> diff --git a/board/keymile/kmp204x/kmp204x.c >> b/board/keymile/kmp204x/kmp204x.c >> index bbb2453..8d6eecb 100644 >> --- a/board/keymile/kmp204x/kmp204x.c >> +++ b/board/keymile/kmp204x/kmp204x.c >> @@ -33,12 +33,51 @@ int checkboard(void) >> return 0; >> } >> >> -/* TODO: implement the I2C deblocking function */ >> -int i2c_make_abort(void) >> +/* I2C deblocking uses the algorithm defined in ../common/common.c, which >> + * makes use of 2 QRIO GPIOs to act on the SCL and SDA signals of an I2C >> bus. >> + * According to the standard I2C IOs must not drive HI-Levels, so the >> + * QRIO GPIOs are used in open-drain fashion: >> + * -> 0 GPIO configured as output that drives low >> + * -> 1 GPIO configured as input pull-up ties high >> + */ >> + > > I failed to understand these comments as well. Are these comments > copy-n-paste? > I will let Rainer answer this as he has written this comment. But I don't think it's copy-n-paste. It's maybe not very clear for people who don't know the hardware. Valentin _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot