Hi Tom,
On Feb 5, 2014, at 5:24 PM, Tom Rini wrote:
> Add a partconf sub-command to the mmc command to allow for setting
> the boot_ack, boot_partition and partition_access fields of
> PARTITION_CONFIG (formerly BOOT_CONFIG, EXT_CSD[179]). Part of this
> requires changing the check for 'part' from an strncmp to a strcmp, like
> the rest of the sub-commands.
>
> Cc: Andy Fleming <aflem...@gmail.com>
> Cc: Pantelis Antoniou <pa...@antoniou-consulting.com>
> Acked-by: Jaehoon Chung <jh80.ch...@samsung.com>
> Signed-off-by: Tom Rini <tr...@ti.com>
> ---
> common/cmd_mmc.c | 30 +++++++++++++++++++++++++++++-
> drivers/mmc/mmc.c | 21 +++++++++++++++++++++
> include/mmc.h | 2 ++
> 3 files changed, 52 insertions(+), 1 deletion(-)
>
> diff --git a/common/cmd_mmc.c b/common/cmd_mmc.c
> index a322063..5842e85 100644
> --- a/common/cmd_mmc.c
> +++ b/common/cmd_mmc.c
> @@ -195,7 +195,7 @@ static int do_mmcops(cmd_tbl_t *cmdtp, int flag, int
> argc, char * const argv[])
> return 1;
> else
> return 0;
> - } else if (strncmp(argv[1], "part", 4) == 0) {
> + } else if (strcmp(argv[1], "part") == 0) {
> block_dev_desc_t *mmc_dev;
> struct mmc *mmc;
>
> @@ -311,7 +311,33 @@ static int do_mmcops(cmd_tbl_t *cmdtp, int flag, int
> argc, char * const argv[])
>
> /* acknowledge to be sent during boot operation */
> return boot_part_access(mmc, 1, part_num, access);
> + } else if (strcmp(argv[1], "partconf") == 0) {
> + int dev;
> + struct mmc *mmc;
> + u8 ack, part_num, access;
> +
> + if (argc == 6) {
> + dev = simple_strtoul(argv[2], NULL, 10);
> + ack = simple_strtoul(argv[3], NULL, 10);
> + part_num = simple_strtoul(argv[4], NULL, 10);
> + access = simple_strtoul(argv[5], NULL, 10);
> + } else {
> + return CMD_RET_USAGE;
> + }
> +
> + mmc = find_mmc_device(dev);
> + if (!mmc) {
> + printf("no mmc device at slot %x\n", dev);
> + return 1;
> + }
>
> + if (IS_SD(mmc)) {
> + puts("PARTITION_CONFIG only exists on eMMC\n");
> + return 1;
> + }
> +
> + /* acknowledge to be sent during boot operation */
> + return mmc_set_part_conf(mmc, ack, part_num, access);
> } else if (strcmp(argv[1], "bootpart-resize") == 0) {
> int dev;
> struct mmc *mmc;
> @@ -451,6 +477,8 @@ U_BOOT_CMD(
> " - Enable boot_part for booting and disable access to boot_part\n"
> "mmc bootpart-resize <dev> <boot part size MB> <RPMB part size MB>\n"
> " - Change sizes of boot and RPMB partitions of specified device\n"
> + "mmc partconf dev boot_ack boot_partition partition_access\n"
> + " - Change the bits of the PARTITION_CONFIG field of the specified
> device\n"
> #endif
> "mmc setdsr - set DSR register value\n"
> );
> diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
> index c6a1c23..1591fce 100644
> --- a/drivers/mmc/mmc.c
> +++ b/drivers/mmc/mmc.c
> @@ -1505,4 +1505,25 @@ int mmc_boot_part_access(struct mmc *mmc, u8 ack, u8
> part_num, u8 access)
> }
> return 0;
> }
> +
> +/*
> + * Modify EXT_CSD[179] which is PARTITION_CONFIG (formerly BOOT_CONFIG)
> + * based on the passed in values for BOOT_ACK, BOOT_PARTITION_ENABLE and
> + * PARTITION_ACCESS.
> + *
> + * Returns 0 on success.
> + */
> +int mmc_set_part_conf(struct mmc *mmc, u8 ack, u8 part_num, u8 access)
> +{
> + int err;
> +
> + err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_PART_CONF,
> + EXT_CSD_BOOT_ACK(ack) |
> + EXT_CSD_BOOT_PART_NUM(part_num) |
> + EXT_CSD_PARTITION_ACCESS(access));
> +
> + if (err)
> + return err;
> + return 0;
> +}
> #endif
> diff --git a/include/mmc.h b/include/mmc.h
> index e1060b9..7e026da 100644
> --- a/include/mmc.h
> +++ b/include/mmc.h
> @@ -312,6 +312,8 @@ int mmc_boot_partition_size_change(struct mmc *mmc,
> unsigned long bootsize,
> unsigned long rpmbsize);
> /* Function to send commands to open/close the specified boot partition */
> int mmc_boot_part_access(struct mmc *mmc, u8 ack, u8 part_num, u8 access);
> +/* Function to modify the PARTITION_CONFIG field of EXT_CSD */
> +int mmc_set_part_conf(struct mmc *mmc, u8 ack, u8 part_num, u8 access);
>
> /**
> * Start device initialization and return immediately; it does not block on
> --
> 1.7.9.5
>
Applied. Thanks.
Signed-off-by: Pantelis Antoniou <pa...@antoniou-consulting.com>
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
