Hi 2009/4/30 alfred steele <alfred.jaq...@gmail.com>: > Hi >> That's fine. >> Which linker script gets actually used for the layout in in case of >> nand_spl. Is it u-boot-nand.lds or u-boot.lds.? > > I am going back to the original intent of this thread, booting off the > linux kernel using TFTP. Here's is a dump of my U-boot env. Does > it look good enough for booting a linux kernel. WHat could be the > reason that the( md of the printk log does not show up the "console > =ttymxc0,115200" correctly. > It looks like its. just "ttymxc0,1152" as evident from the memory > dump i had sent ealier in this thread. > > =>printenv > > baudrate=115200 > netdev=eth0 > uboot=u-boot.bin > nfsroot=/tools/rootfs/rootfs-2.6.24 > bootargs_base=setenv bootargs console=ttymxc0,115200 > bootargs_nfs=setenv bootargs ${bootargs} root=/dev/nfs ip=dhcp > nfsroot=${serveri > p}:${nfsroot} rw > bootcmd=run bootcmd_net > bootcmd_net=run bootargs_base bootargs_nfs; tftpboot ${loadaddr} > ${tftp_server}: > ${kernel}; bootm > tftp_server=206.44.18.25 > kernel=uImage_spin2 > loadaddr=0x80008000 > bootdelay=5 > filesize=196828 > fileaddr=81000000 > ipaddr=206.44.18.31 > serverip=206.44.18.25 > loadaddr=0x80008000 > bootargs=root=/dev/nfs rw > stdin=serial > stdout=serial > stderr=serial
I tend to load my kernels to 0x81000000 and not 0x80008000 but I don't know if that really matters. Other than that I think 'run bootcmd_net' should work. /Magnus _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot