Signed-off-by: Yoshinori Sato <[email protected]> --- board/renesas/ms7206se/Makefile | 10 +++ board/renesas/ms7206se/lowlevel_init.S | 124 +++++++++++++++++++++++++++++++++ board/renesas/ms7206se/ms7206se.c | 43 ++++++++++++ boards.cfg | 1 + include/configs/ms7206se.h | 95 +++++++++++++++++++++++++ 5 files changed, 273 insertions(+) create mode 100644 board/renesas/ms7206se/Makefile create mode 100644 board/renesas/ms7206se/lowlevel_init.S create mode 100644 board/renesas/ms7206se/ms7206se.c create mode 100644 include/configs/ms7206se.h
diff --git a/board/renesas/ms7206se/Makefile b/board/renesas/ms7206se/Makefile new file mode 100644 index 0000000..eed3769 --- /dev/null +++ b/board/renesas/ms7206se/Makefile @@ -0,0 +1,10 @@ +# +# Copyright (C) 2013 Yoshinori Sato <[email protected]> +# +# u-boot/board/renesas/ms7206se/Makefile +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y := ms7206se.o +obj-y += lowlevel_init.o diff --git a/board/renesas/ms7206se/lowlevel_init.S b/board/renesas/ms7206se/lowlevel_init.S new file mode 100644 index 0000000..4e5bde4 --- /dev/null +++ b/board/renesas/ms7206se/lowlevel_init.S @@ -0,0 +1,124 @@ +/* + * Copyright (C) 2013 Yoshinori Sato <[email protected]> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <config.h> +#include <version.h> + +#include <asm/processor.h> +#include <asm/macro.h> +#define INTMSK0 0x11800000 + + .global lowlevel_init + + .text + .align 2 + +lowlevel_init: + mova CPG_settings_table,r0 +1: mov.l @r0+,r3 // Address (or zero) + tst r3,r3 + bt 2f + mov.l @r0+,r1 // data + bra 1b + mov.w r1,@r3 +2: + mov.l $mclkcr,r0 // MCLKCR setting + mov #0x40,r1 + mov.b r1,@r0 + + // Set up the Bus Controler + mova BSC_settings_table,r0 +5: mov.l @r0+,r3 // Address (or zero) + tst r3,r3 + bt 6f + mov.l @r0+,r1 // data + bra 5b + mov.l r1,@r3 + +6: + mov.l $delay_count,r0 +7: + dt r0 + bf 7b + + mov.l $SDMR,r1 // Turns on SDRAM controller + mov.l $SDMR_val,r2 + mov.l r2,@r1 + + // Set up the Pin Function Controler + mova PFC_settings_table,r0 +3: mov.l @r0+,r3 // Address (or zero) + tst r3,r3 + bt 4f + mov.l @r0+,r1 // data + bra 3b + mov.w r1,@r3 +4: + rts/n + + .align 4 +$delay_count: + .long 2000 +$SDMR: .long 0xfffc5880 +$SDMR_val: + .long 0 + +$mclkcr: + .long MCLKCR + +CPG_settings_table: + .long WTCSR,0xA500 + .long WTCNT,0x5A00 + .long WTCSR,0xA51E + .long FRQCR, 0x120c /* input:33.3333MHz I:B:P=6:2:1=200MHz:66MHz:33MHz */ + .long 0 + +BSC_settings_table: + # Settings from Hitachi docs for SE7206 + .long CMNCR, 0x00001010 + .long CS0BCR, 0x10000600 + .long CS2BCR, 0x10000600 + .long CS4BCR, 0x10000400 + .long CS5BCR, 0x10000400 + .long CS3BCR, 0x10004600 + .long CS0WCR, 0x00000380 /* wait:4cycle */ + .long CS2WCR, 0x00000380 + .long CS4WCR, 0x00000380 + .long CS5WCR, 0x00000380 + .long CS3WCR, 0x00004892 /* pre->actv:1cycle, actv->read/write:2cycle, write->pre:1cycle, ref->actv:4cycle */ + .long SDCR, 0x00000811 + .long RTCNT, 0xa55a0083 + .long RTCOR, 0xa55a0083 + .long RTCSR, 0xa55a0008 /* reflesh count=Bclk/4 */ + .long 0 + +PFC_settings_table: + .long PACRH3, 0x0022 + .long PACRH2, 0x1111 + .long PACRH1, 0x1115 + .long PACRL4, 0x1111 + .long PACRL3, 0x1125 + .long PACRL2, 0x2255 + .long PACRL1, 0x5500 + .long PBCR3, 0x0022 + .long PBCR2, 0x2244 + .long PBCR1, 0x1111 + .long PCCRL1, 0x1111 + .long PDCRH4, 0x1111 + .long PDCRH3, 0x1111 + .long PDCRH2, 0x1111 + .long PDCRH1, 0x1111 + .long PDCRL4, 0x1111 + .long PDCRL3, 0x1111 + .long PECRH1, 0x0005 + .long PECRL4, 0x3223 + .long PECRL3, 0x3030 + .long PECRL2, 0x3550 + .long IFCR, 0x0003 + .long 0 + +$INTMSK0: + .long INTMSK0 diff --git a/board/renesas/ms7206se/ms7206se.c b/board/renesas/ms7206se/ms7206se.c new file mode 100644 index 0000000..45906fb --- /dev/null +++ b/board/renesas/ms7206se/ms7206se.c @@ -0,0 +1,43 @@ +/* + * Copyright (C) 2013 Yoshinori Sato <[email protected]> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <net.h> +#include <netdev.h> +#include <asm/io.h> +#include <asm/processor.h> + +DECLARE_GLOBAL_DATA_PTR; + +int checkboard(void) +{ + puts("BOARD: Renesas Technology MS7206SE\n"); + return 0; +} + +int board_init(void) +{ + return 0; +} + +int dram_init(void) +{ + gd->bd->bi_memstart = CONFIG_SYS_SDRAM_BASE; + gd->bd->bi_memsize = CONFIG_SYS_SDRAM_SIZE; + printf("DRAM: %dMB\n", CONFIG_SYS_SDRAM_SIZE / (1024 * 1024)); + return 0; +} + +#ifdef CONFIG_CMD_NET +int board_eth_init(bd_t *bis) +{ + int rc = 0; +#ifdef CONFIG_SMC91111 + rc = smc91111_initialize(0, CONFIG_SMC91111_BASE); +#endif + return rc; +} +#endif diff --git a/boards.cfg b/boards.cfg index c97c4bd..a56f196 100644 --- a/boards.cfg +++ b/boards.cfg @@ -1203,6 +1203,7 @@ Active powerpc ppc4xx - xilinx ppc440-generic Active powerpc ppc4xx - xilinx ppc440-generic xilinx-ppc440-generic_flash xilinx-ppc440-generic:SYS_TEXT_BASE=0xF7F60000,RESET_VECTOR_ADDRESS=0xF7FFFFFC Ricardo Ribalda <[email protected]> Active sandbox sandbox - sandbox sandbox sandbox - Simon Glass <[email protected]> Active sh sh2 - renesas rsk7203 rsk7203 - Nobuhiro Iwamatsu <[email protected]>:Nobuhiro Iwamatsu <[email protected]> +Active sh sh2 - renesas ms7206se ms7206se - Yoshinori Sato <[email protected]> Active sh sh2 - renesas rsk7264 rsk7264 - Phil Edworthy <[email protected]> Active sh sh2 - renesas rsk7269 rsk7269 - - Active sh sh3 - - mpr2 mpr2 - Mark Jonas <[email protected]> diff --git a/include/configs/ms7206se.h b/include/configs/ms7206se.h new file mode 100644 index 0000000..805044c --- /dev/null +++ b/include/configs/ms7206se.h @@ -0,1 +1,95 @@ +/* + * Configuation settings for the Renesas Technology MS7206SE + * + * Copyright (C) 2013 Yoshinori Sato <[email protected]> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __MS7206SE_H +#define __MS7206SE + +#undef DEBUG +#define CONFIG_SH 1 +#define CONFIG_SH2 1 +#define CONFIG_SH2A 1 +#define CONFIG_CPU_SH7206 1 +#define CONFIG_MS7206SE 1 + +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_NET +#define CONFIG_CMD_SAVEENV +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_MEMTEST +#define CONFIG_CMD_CACHE + +#define CONFIG_BAUDRATE 115200 +#define CONFIG_BOOTARGS "console=ttySC3,115200" +#define CONFIG_LOADADDR 0x0C100000 /* MS7206SE01_SDRAM_BASE + 1MB */ + +#define CONFIG_VERSION_VARIABLE +#undef CONFIG_SHOW_BOOT_PROGRESS + +/* MEMORY */ +#define MS7206SE_SDRAM_BASE 0x0C000000 +#define MS7206SE_FLASH_BASE_1 0x20000000 /* Non cache */ +#define MS7206SE_FLASH_BANK_SIZE (16 * 1024 * 1024) + +#define CONFIG_SYS_TEXT_BASE 0x0C7C0000 +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ +#define CONFIG_SYS_CBSIZE 256 /* Buffer size for input from the Console */ +#define CONFIG_SYS_PBSIZE 256 /* Buffer size for Console output */ +#define CONFIG_SYS_MAXARGS 16 /* max args accepted for monitor commands */ +/* Buffer size for Boot Arguments passed to kernel */ +#define CONFIG_SYS_BARGSIZE 512 +/* List of legal baudrate settings for this board */ +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/* SCIF */ +#define CONFIG_SCIF_CONSOLE 1 +#define CONFIG_CONS_SCIF3 1 + +#define CONFIG_SYS_MEMTEST_START CONFIG_LOADADDR +#define CONFIG_SYS_MEMTEST_END (CONFIG_LOADADDR + (63 * 1024 * 1024)) + +#define CONFIG_SYS_SDRAM_BASE MS7206SE_SDRAM_BASE +#define CONFIG_SYS_SDRAM_SIZE (64 * 1024 * 1024) + +#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 1024 * 1024) +#define CONFIG_SYS_MONITOR_BASE MS7206SE_FLASH_BASE_1 +#define CONFIG_SYS_MONITOR_LEN (128 * 1024) +#define CONFIG_SYS_MALLOC_LEN (256 * 1024) +#define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024) + +/* FLASH */ +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT +#undef CONFIG_SYS_FLASH_QUIET_TEST +#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ +#define CONFIG_SYS_FLASH_BASE MS7206SE_FLASH_BASE_1 +#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } +#define CONFIG_SYS_MAX_FLASH_SECT 142 +#define CONFIG_SYS_MAX_FLASH_BANKS 1 + +#define CONFIG_ENV_IS_IN_FLASH +#define CONFIG_ENV_SECT_SIZE (128 * 1024) +#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) +#define CONFIG_SYS_FLASH_ERASE_TOUT 12000 +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 + +/* Board Clock */ +#define CONFIG_SYS_CLK_FREQ 33333333 +#define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ +#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ +#define CMT_CLK_DIVIDER 32 /* 8 (default), 32, 128 or 512 */ +#define CONFIG_SH_CMT_CLK_FREQ (CONFIG_SYS_CLK_FREQ / CMT_CLK_DIVIDER) + +/* Network interface */ +#define CONFIG_SMC91111 +#define CONFIG_SMC91111_BASE (0x30000000) + +#endif /* __MS7206SE_H */ -- 1.8.5.3 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
