On 02/17/2014 11:56 AM, Dennis Gilmore wrote:
> Signed-off-by: Dennis Gilmore <den...@ausil.us>
> ---
> include/configs/am335x_evm.h | 109
> ++++----------------------------------
> include/configs/ti_armv7_common.h | 28 ++--------
> 2 files changed, 16 insertions(+), 121 deletions(-)
>
> diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
> index 73a9adb..b7dcb42 100644
> --- a/include/configs/am335x_evm.h
> +++ b/include/configs/am335x_evm.h
> @@ -43,9 +43,9 @@
> "nandrootfstype=ubifs rootwait=1\0" \
> "nandboot=echo Booting from nand ...; " \
> "run nandargs; " \
> - "nand read ${fdtaddr} u-boot-spl-os; " \
> + "nand read ${fdt_addr} u-boot-spl-os; " \
> "nand read ${loadaddr} kernel; " \
> - "bootz ${loadaddr} - ${fdtaddr}\0"
> + "bootz ${loadaddr} - ${fdt_addr}\0"
> #else
> #define NANDARGS ""
> #endif
> @@ -55,98 +55,13 @@
> #ifndef CONFIG_SPL_BUILD
> #define CONFIG_EXTRA_ENV_SETTINGS \
> "loadaddr=0x80200000\0" \
> - "fdtaddr=0x80F80000\0" \
> + "fdt_addr=0x80F80000\0" \
> + "fdt_addr_r=0x80F80000\0" \
> "fdt_high=0xffffffff\0" \
> - "boot_fdt=try\0" \
> - "rdaddr=0x81000000\0" \
> - "bootpart=0:2\0" \
> - "bootdir=/boot\0" \
> - "bootfile=zImage\0" \
> - "fdtfile=undefined\0" \
> - "console=ttyO0,115200n8\0" \
> - "optargs=\0" \
> - "mmcdev=0\0" \
> - "mmcroot=/dev/mmcblk0p2 ro\0" \
> - "mmcrootfstype=ext4 rootwait\0" \
> - "rootpath=/export/rootfs\0" \
> - "nfsopts=nolock\0" \
> - "static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}" \
> - "::off\0" \
> - "ramroot=/dev/ram0 rw ramdisk_size=65536 initrd=${rdaddr},64M\0" \
> - "ramrootfstype=ext2\0" \
> - "mmcargs=setenv bootargs console=${console} " \
> - "${optargs} " \
> - "root=${mmcroot} " \
> - "rootfstype=${mmcrootfstype}\0" \
> - "spiroot=/dev/mtdblock4 rw\0" \
> - "spirootfstype=jffs2\0" \
> - "spisrcaddr=0xe0000\0" \
> - "spiimgsize=0x362000\0" \
> - "spibusno=0\0" \
> - "spiargs=setenv bootargs console=${console} " \
> - "${optargs} " \
> - "root=${spiroot} " \
> - "rootfstype=${spirootfstype}\0" \
> - "netargs=setenv bootargs console=${console} " \
> - "${optargs} " \
> - "root=/dev/nfs " \
> - "nfsroot=${serverip}:${rootpath},${nfsopts} rw " \
> - "ip=dhcp\0" \
> - "bootenv=uEnv.txt\0" \
> - "loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
> - "importbootenv=echo Importing environment from mmc ...; " \
> - "env import -t $loadaddr $filesize\0" \
> - "ramargs=setenv bootargs console=${console} " \
> - "${optargs} " \
> - "root=${ramroot} " \
> - "rootfstype=${ramrootfstype}\0" \
> - "loadramdisk=load mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \
> - "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
> - "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
> - "mmcloados=run mmcargs; " \
> - "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
> - "if run loadfdt; then " \
> - "bootz ${loadaddr} - ${fdtaddr}; " \
> - "else " \
> - "if test ${boot_fdt} = try; then " \
> - "bootz; " \
> - "else " \
> - "echo WARN: Cannot load the DT; " \
> - "fi; " \
> - "fi; " \
> - "else " \
> - "bootz; " \
> - "fi;\0" \
> - "mmcboot=mmc dev ${mmcdev}; " \
> - "if mmc rescan; then " \
> - "echo SD/MMC found on device ${mmcdev};" \
> - "if run loadbootenv; then " \
> - "echo Loaded environment from ${bootenv};" \
> - "run importbootenv;" \
> - "fi;" \
> - "if test -n $uenvcmd; then " \
> - "echo Running uenvcmd ...;" \
> - "run uenvcmd;" \
> - "fi;" \
> - "if run loadimage; then " \
> - "run mmcloados;" \
> - "fi;" \
> - "fi;\0" \
> - "spiboot=echo Booting from spi ...; " \
> - "run spiargs; " \
> - "sf probe ${spibusno}:0; " \
> - "sf read ${loadaddr} ${spisrcaddr} ${spiimgsize}; " \
> - "bootz ${loadaddr}\0" \
> - "netboot=echo Booting from network ...; " \
> - "setenv autoload no; " \
> - "dhcp; " \
> - "tftp ${loadaddr} ${bootfile}; " \
> - "tftp ${fdtaddr} ${fdtfile}; " \
> - "run netargs; " \
> - "bootz ${loadaddr} - ${fdtaddr}\0" \
> - "ramboot=echo Booting from ramdisk ...; " \
> - "run ramargs; " \
> - "bootz ${loadaddr} ${rdaddr} ${fdtaddr}\0" \
> + "ramdisk_addr_r=0x81000000\0" \
> + "kernel_addr_r=0x80200000\0" \
> + "pxe_addr_r=0x80000000\0" \
> + "scriptaddr=0x80000000\0" \
> "findfdt="\
> "if test $board_name = A335BONE; then " \
> "setenv fdtfile am335x-bone.dtb; fi; " \
> @@ -159,15 +74,13 @@
> "if test $fdtfile = undefined; then " \
> "echo WARNING: Could not determine device tree to use;
> fi; \0" \
> NANDARGS \
> - DFUARGS
> + DFUARGS \
> + BOOTCMDS_COMMON
> #endif
>
> #define CONFIG_BOOTCOMMAND \
> "run findfdt; " \
> - "run mmcboot;" \
> - "setenv mmcdev 1; " \
> - "setenv bootpart 1:2; " \
> - "run mmcboot;" \
> + "for target in ${boot_targets}; do run bootcmd_${target}; done" \
> "run nandboot;"
>
> /* NS16550 Configuration */
> diff --git a/include/configs/ti_armv7_common.h
> b/include/configs/ti_armv7_common.h
> index 99b60fc..016966a 100644
> --- a/include/configs/ti_armv7_common.h
> +++ b/include/configs/ti_armv7_common.h
> @@ -28,7 +28,6 @@
> #define CONFIG_SYS_NO_FLASH
>
> /* Support both device trees and ATAGs. */
> -#define CONFIG_OF_LIBFDT
> #define CONFIG_CMDLINE_TAG
> #define CONFIG_SETUP_MEMORY_TAGS
> #define CONFIG_INITRD_TAG
> @@ -40,11 +39,6 @@
> #define CONFIG_SYS_LOAD_ADDR 0x80000000
>
> /*
> - * Default to a quick boot delay.
> - */
> -#define CONFIG_BOOTDELAY 1
> -
> -/*
> * DDR information. We say (for simplicity) that we have 1 bank,
> * always, even when we have more. We always start at 0x80000000,
> * and we place the initial stack pointer in our SRAM.
> @@ -101,19 +95,12 @@
> * console baudrate of 115200 and use the default baud rate table.
> */
> #define CONFIG_SYS_MALLOC_LEN (1024 << 10)
> -#define CONFIG_SYS_HUSH_PARSER
> #define CONFIG_SYS_PROMPT "U-Boot# "
> #define CONFIG_SYS_CONSOLE_INFO_QUIET
> #define CONFIG_BAUDRATE 115200
> #define CONFIG_ENV_VARS_UBOOT_CONFIG /* Strongly encouraged */
> #define CONFIG_ENV_OVERWRITE /* Overwrite ethaddr / serial# */
>
> -/* As stated above, the following choices are optional. */
> -#define CONFIG_SYS_LONGHELP
> -#define CONFIG_AUTO_COMPLETE
> -#define CONFIG_CMDLINE_EDITING
> -#define CONFIG_VERSION_VARIABLE
> -
> /* We set the max number of command args high to avoid HUSH bugs. */
> #define CONFIG_SYS_MAXARGS 64
>
> @@ -146,19 +133,14 @@
> #include <config_cmd_default.h>
> #define CONFIG_CMD_ASKENV
> #define CONFIG_CMD_ECHO
> -#define CONFIG_CMD_BOOTZ
>
> /*
> - * Common filesystems support. When we have removable storage we
> - * enabled a number of useful commands and support.
> + * Include the generic config options and boot environment when not
> + * building our SPL
> */
> -#if defined(CONFIG_MMC) || defined(CONFIG_USB_STORAGE)
> -#define CONFIG_DOS_PARTITION
> -#define CONFIG_CMD_FAT
> -#define CONFIG_FAT_WRITE
> -#define CONFIG_CMD_EXT2
> -#define CONFIG_CMD_EXT4
> -#define CONFIG_CMD_FS_GENERIC
> +#ifndef CONFIG_SPL_BUILD
> +#include <config_distro_defaults.h>
I did not see the patchset for this.
Should this header and the removal the extra configs be a different patch?
Or be part of the series that introduces the distro defaults
> +#include <config_distro_bootcmd.h>
> #endif
>
> /*
--
------------------
Dan Murphy
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
