Since the switch may be re-configured for VLAN usage in Linux (or any
other OS), lets reset the switch to its default register values upon
power-up. Otherwise network might not be available in U-Boot.

Signed-off-by: Stefan Roese <s...@denx.de>
Cc: Heiko Schocher <h...@denx.de>
Cc: Roger Meier <r.me...@siemens.com>
Cc: Lukas Stockmann <lukas.stockm...@siemens.com>
Cc: Tom Rini <tr...@ti.com>
---
 board/siemens/dxr2/board.c | 7 +++++++
 board/siemens/dxr2/mux.c   | 2 ++
 include/configs/dxr2.h     | 1 +
 3 files changed, 10 insertions(+)

diff --git a/board/siemens/dxr2/board.c b/board/siemens/dxr2/board.c
index 6c316fa..f87315c 100644
--- a/board/siemens/dxr2/board.c
+++ b/board/siemens/dxr2/board.c
@@ -232,6 +232,13 @@ int board_eth_init(bd_t *bis)
 
        factoryset_setenv();
 
+       /* Reset SMSC LAN9303 switch for default configuration */
+       gpio_request(GPIO_LAN9303_NRST, "nRST");
+       gpio_direction_output(GPIO_LAN9303_NRST, 0);
+       /* assert active low reset for 200us */
+       udelay(200);
+       gpio_set_value(GPIO_LAN9303_NRST, 1);
+
        /* Set rgmii mode and enable rmii clock to be sourced from chip */
        writel((RMII_MODE_ENABLE | RMII_CHIPCKL_ENABLE), &cdev->miisel);
 
diff --git a/board/siemens/dxr2/mux.c b/board/siemens/dxr2/mux.c
index 5c22999..f2314b5 100644
--- a/board/siemens/dxr2/mux.c
+++ b/board/siemens/dxr2/mux.c
@@ -221,6 +221,8 @@ static struct module_pin_mux gpios_pin_mux[] = {
        {OFFSET(ain0), MODE(7) | RXACTIVE | PULLUDDIS},
        {OFFSET(vrefp), MODE(7) | RXACTIVE | PULLUDDIS},
        {OFFSET(vrefn), MODE(7) | RXACTIVE | PULLUDDIS},
+       /* nRST for SMSC LAN9303 switch - GPIO2_24 */
+       {OFFSET(lcd_pclk), MODE(7) },                   /* LAN9303 nRST */
        {-1},
 };
 
diff --git a/include/configs/dxr2.h b/include/configs/dxr2.h
index 1e42f5c..b01a9fe 100644
--- a/include/configs/dxr2.h
+++ b/include/configs/dxr2.h
@@ -26,6 +26,7 @@
 
 #define BOARD_DFU_BUTTON_GPIO  27
 #define BOARD_DFU_BUTTON_LED   64
+#define GPIO_LAN9303_NRST      88      /* GPIO2_24 = gpio88 */
 
 #undef CONFIG_DOS_PARTITION
 #undef CONFIG_CMD_FAT
-- 
1.8.5.5

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to