On 02/17/2014 07:28 PM, Zhao Qiang wrote: > CONFIG_SYS_QE_FMAN_FW_ADDR is used to both Fman and QE for microcode address. > Now using CONFIG_SYS_FMAN_FW_ADDR for Fman microcode address, > and CONFIG_SYS_QE_FW_ADDR for QE microcode address. > > Signed-off-by: Zhao Qiang <[email protected]> > --- > Changes for v2: > - no > Changes for v3: > - no > Changes for v4: > - no > > README | 9 +++++++-- > arch/powerpc/cpu/mpc85xx/cpu_init.c | 2 +- > drivers/net/fm/fm.c | 12 ++++++------ > drivers/qe/qe.c | 2 +- > include/configs/B4860QDS.h | 10 +++++----- > include/configs/MPC8569MDS.h | 2 +- > include/configs/P1023RDB.h | 2 +- > include/configs/P1023RDS.h | 4 ++-- > include/configs/P2041RDB.h | 10 +++++----- > include/configs/T1040QDS.h | 8 ++++---- > include/configs/T1040RDB.h | 8 ++++---- > include/configs/T1042RDB_PI.h | 8 ++++---- > include/configs/T2080QDS.h | 10 +++++----- > include/configs/T4240EMU.h | 2 +- > include/configs/T4240QDS.h | 10 +++++----- > include/configs/corenet_ds.h | 10 +++++----- > include/configs/km/km8309-common.h | 2 +- > include/configs/km/kmp204x-common.h | 2 +-
Please double check the change for km. It has compiling error. It seems to use FMAN but you changed it to QE. York _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
