On 02/26/2014 12:59 AM, Suresh Gupta wrote: > USB spec says that the minimum disconnect threshold should be > over 525 mV. However, internal USB PHY threshold value is below > this specified value. Due to this some devices disconnect at > run-time. Hence, phy settings are tweaked to increased disconnect > threshold to be above 525mV by using this workaround. > > Signed-off-by: Suresh Gupta <[email protected]> > --- > Changes for v2: > - Incorporated missing SOC's affected by errata >
Applied to u-boot-mpc85xx/master. Thanks. York _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
