On 03/10/2014 11:16 PM, Tang Yuantian-B29983 wrote: >> -----Original Message----- >> From: Sun York-R58495 >> Sent: Tuesday, March 11, 2014 1:45 AM >> To: Tang Yuantian-B29983 >> Cc: u-boot@lists.denx.de; Li Yang-Leo-R58472; Jin Zhengxiong-R64188; Wood >> Scott-B07421 >> Subject: Re: [PATCH 2/2 v2] mpc85xx/t104x: Add deep sleep framework >> support >> >> On 02/28/2014 03:09 AM, yuantian.t...@freescale.com wrote: >>> From: Tang Yuantian <yuantian.t...@freescale.com> >>> >>> When T104x soc wakes up from deep sleep, control is passed to the >>> primary core that starts executing uboot. After re-initialized some IP >>> blocks, like DDRC, kernel will take responsibility to continue to >>> restore environment it leaves before. >>> >>> Signed-off-by: Tang Yuantian <yuantian.t...@freescale.com> >>> --- >>> v2: >>> - added explaination for CONFIG_DEEP_SLEEP >>> - fixed some issues >>> >>> README | 4 +++ >>> arch/powerpc/cpu/mpc85xx/asm-offsets.c | 24 ++++++++++++++ >> >> Please fix the out-of-tree compiling issue. You will see it if you run >> make with O=<path> parameter. >> >> York > > Could you be more specific? What *path* should I give? > If I do the below, I got error: > > $ make O=/home/tangyt/opensource/u-boot/ > /home/tangyt/opensource/u-boot is not clean, please run 'make mrproper' > in the '/home/tangyt/opensource/u-boot' directory. > make[1]: *** [prepare3] Error 1 > make: *** [sub-make] Error 2 >
It is out-of-tree compiling. You should use a clean path. cd <u-boot source) mkdir ../build make O=../build T1040QDS_config make O=../build You should add other flags you normally use. York _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
