Op 12 mrt. 2014, om 13:56 heeft Ian Campbell <i...@hellion.org.uk> het volgende geschreven:
> On Wed, 2014-03-12 at 05:43 -0700, Ezaul Zillmer wrote: > > I'm afraid much of your mail was incomprehensible to me. > >> setenv bootargs console = tty0 console = ttyS0, 115200 = hdmi.audio >> EDID: 0 = disp.screen0_output_mode EDID: 1280x800p60 root = / dev/sda1 >> rootfstype = ext4 rootwait panic = 10 >> ext4load 0 0x43000000 scsi boot / script.bin >> ext4load 0 0x46000000 scsi boot / uImage >> ext4load scsi 0 0x49000000 boot/cubie2.dtb > > The first two and the last one are using a totally different syntax, > only one of them can be correct, I suggest you check the uboot help/docs > and experiment by hand on the uboot console before trying to construct a > boot.scr. I've noticed 'ext4load' twice today, once in the mail above and once in the 'fedora on panda' blog post. What's stopping people from using the generic 'fsload' commands? regards, Koen _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot