Dear Sanjeev Premi, In message <[email protected]> you wrote: > The current configuration doesn't define default > bootfile; leading to this warning at execution:
Note that this is not a problem, but a decision of the board maintainer. Also, you can always just use setenv + saveenv if you want this changed on your board. > OMAP3_EVM # dhcp > ... > ... > DHCP client bound to address 192.168.1.11 > *** Warning: no boot file name; using 'AC18BE16.img' > TFTP from server 0.0.0.0; our IP address is 192.168.1.11; > sending through gateway 192.168.1.1 > Filename 'AC18BE16.img'. > Load address: 0x82000000 > Loading: * > TFTP error: 'File not found' (1) This is standard behaviour and not a problem. > Signed-off-by: Sanjeev Premi <[email protected]> > --- > include/configs/omap3_evm.h | 2 ++ > 1 files changed, 2 insertions(+), 0 deletions(-) > > diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h > index 549cef9..e205c01 100644 > --- a/include/configs/omap3_evm.h > +++ b/include/configs/omap3_evm.h > @@ -149,6 +149,8 @@ > /* Environment information */ > #define CONFIG_BOOTDELAY 10 > > +#define CONFIG_BOOTFILE uImage > + You should probably add the board maintainer on Cc: (done here) to get his ACK. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [email protected] The thing is, as you progress in the Craft, you'll learn there is another rule... When you break rules, break 'em good and hard. - Terry Pratchett, _Wyrd Sisters_ _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
