hi David,
I have checked the ARMv8's Architecture Reference Manual
DDI0487A_a_armv8_arm.pdf chapter "C4.4.1
DC CISW, Data or unified Cache line Clean and Invalidate by Set/Way", u
can see the description as below:
SetWay, bits [31:4]
Contains two fields:
• Way, bits[31:32-A], the number of the way to operate on.
• Set, bits[B-1:L], the number of the set to operate on.
Bits[L-1:4] are RES0.
A = Log2(ASSOCIATIVITY), L = Log2(LINELEN), B = (L + S), S = Log2(NSETS).
ASSOCIATIVITY, LINELEN (line length, in bytes), and NSETS (number of
sets) have their usual meanings and are the values for the cache level
being operated on. The values of A and S are rounded up to the next integer.
Also we have tested on ARMv8's soc, we found this issue will introduce
the cache cannot flush properly into DDR so that kernel cannot boot up
successfully.
BTW, i compared with Linux kernel's code for flushing operations and
just commit this patch to align with it.
Thx,
Leo Yan
On 04/01/2014 11:25 AM, feng...@phytium.com.cn wrote:
hi Leo,
Please reference ARMv8-TRM, the associativity field does not have
to be a power of 2. I made the same mistake with you previously and
scott identify this.
*发件人:* Leo Yan <mailto:l...@marvell.com>
*发送时间:* 2014年3月31日, 星期一 9:11
*收件人:* u-boot <mailto:u-boot@lists.denx.de>, David Feng
<mailto:feng...@phytium.com.cn>, Scott Wood <mailto:scottw...@freescale.com>
*抄送:* Leo Yan <mailto:l...@marvell.com>
When flush the d$ with set/way instruction, it need calculate the way's
offset = log2(Associativity); but in current uboot's code, it use below
formula to calculate the offset: log2(Associativity * 2 - 1), so finally
it cannot flush data cache properly.
Signed-off-by: Leo Yan <l...@marvell.com>
---
arch/arm/cpu/armv8/cache.S | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/arch/arm/cpu/armv8/cache.S b/arch/arm/cpu/armv8/cache.S
index 546a83e..256d2e2 100644
--- a/arch/arm/cpu/armv8/cache.S
+++ b/arch/arm/cpu/armv8/cache.S
@@ -30,9 +30,7 @@ ENTRY(__asm_flush_dcache_level)
add x2, x2, #4 /* x2 <- log2(cache line size) */
mov x3, #0x3ff
and x3, x3, x6, lsr #3 /* x3 <- max number of #ways */
- add w4, w3, w3
- sub w4, w4, 1 /* round up log2(#ways + 1) */
- clz w5, w4 /* bit position of #ways */
+ clz w5, w3 /* bit position of #ways */
mov x4, #0x7fff
and x4, x4, x6, lsr #13 /* x4 <- max number of #sets */
/* x1 <- cache level << 1 */
--
1.7.9.5
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
