On Mon, 2014-03-31 at 15:34 +0530, Prabhakar Kushwaha wrote: > nand_spl_load_image() can also be used for non TPL framework. > > Signed-off-by: Prabhakar Kushwaha <prabha...@freescale.com> > --- > drivers/mtd/nand/fsl_ifc_spl.c | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/drivers/mtd/nand/fsl_ifc_spl.c b/drivers/mtd/nand/fsl_ifc_spl.c > index 2f82f7c..8a7a3a3 100644 > --- a/drivers/mtd/nand/fsl_ifc_spl.c > +++ b/drivers/mtd/nand/fsl_ifc_spl.c > @@ -88,7 +88,7 @@ static inline int bad_block(uchar *marker, int port_size) > return __raw_readw((u16 *)marker) != 0xffff; > } > > -#ifdef CONFIG_TPL_BUILD > +#if defined(CONFIG_TPL_BUILD) || defined(CONFIG_SPL_BUILD) > int nand_spl_load_image(uint32_t offs, unsigned int uboot_size, void *vdst) > #else > static int nand_load(uint32_t offs, unsigned int uboot_size, void *vdst) > @@ -221,7 +221,7 @@ static int nand_load(uint32_t offs, unsigned int > uboot_size, void *vdst) > * Defines a static function nand_load_image() here, because non-static makes > * the code too large for certain SPLs(minimal SPL, maximum size <= 4Kbytes) > */ > -#ifndef CONFIG_TPL_BUILD > +#if !defined(CONFIG_TPL_BUILD) && !defined(CONFIG_SPL_BUILD) > #define nand_spl_load_image(offs, uboot_size, vdst) \ > nand_load(offs, uboot_size, vdst) > #endif
When would you ever use this file without having CONFIG_SPL_BUILD defined? -Scott _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot